Mercedes-Benz Remote key programmer with BGA calculator.

Supports all key lost situations. Mainly used for key reading and writing, EIS tools, password calculation, key file preparing, ESL tools, ECU/Gearbox renew and many special functions.

FUNCTIONS:

1. Support BE key,read password and prepare new key via IR.

2. NEC V051, V057 support on board get password

3. All NEC keys support on board write and erase

4. Password calculate:support BGA keys,NEC keys(include 51,57version)etc.,work fast.

5. Support renew EIS and ELV

6. Support write EIS and ELV

7. Support online generate key file

8. Unlock ELV function will be released soon.

9. Renew other control modules function will support soon

Once you purchase it, you will receive free and frequent updates, adding new features and improving the ones already available.

The vehicles supported by IR or OBD are:

- W164, W164 2009+

- A166, W197,W212, W218, A246

- A169, W209, W211

- W172, W204, A207

- W203

- W204, W207, W212 only by dump

- W209 only by dump

- W210

- W215, W220

- W230

- W216

- W221

- W906

This software upgrades your VVDI2 from basic to full software.

FEM, MQB and ID48 CLONING ARE NOT INCLUDED

The Panther SX is a high quality key machine able to cut lazer and dimple keys with precision and simplicity with the added benefit of carrier locks to aid control or certain applications. In addition the clamps on the SX version can be angle through 45 degrees to enable angled cuts to be performed.

The Panther range of key cutting machines offer a high quality and robust design offering excellent precision and long term performance in even the busiest key cutting centres. The ergonomic design and broad base gives the machine a stable operation and accurate. The most striking feature of this series of machines is the versatility and accuracy built into this machine that an only be matched by machines that a far more expensive.

The ball bearing chassis offers the highest accuracy, smooth operation and support whilst being total maintenance free. The rotary level enables the spring tension to adjusted to your preferred settings. The level control offers a smooth and precise feel that gives the operator confidence in the milling process.

Thanks to the electronic control supported adjustment system the calibration can be completed in a few steps and offer an accuracy of 0.01mm. The correct setting is detailed with a go/no go warning light calibration system that assists easy and rapid calibration. Both the X and Y axis can be locked in any position by simply tightening the control level.

An LED illumination strip built into the roof of the body and directed at the cutter / jaw area offers excellent visibility of the work in all ambient light conditions.

The tracer can be lowered to the work to enable the centre to be identified and the position of the tracer pre checked without the cutting mill touching the new key. Once confirmed can be locked back in the calibrated position. Once the cutter is lowered to the work the handle can be rotated and lock to the depth of the required milling, this enables the calibrated depth to be maintained.

The highly accurate clamping system has 3 different positions to offer the greatest flexibility of key clamping. The jaws included graded position and stop positioning. The quick clamps offer rapid and accurate clamping of the work.

The cutting tools are conveniently stored in the toolbox in the front of the machine.

The Panther is CE approved and equipped with a safety shield over the cutting blade which protects the operator and deflects displaced metal.

TECHNICAL SPECIFICATIONS:

Height: 34x30x42

Engine power:150W

Noise: 64dB.

Weight: 20 Kg.

RPM: 5800 r.pm. 150W

220V

Includes the following software:

- Hitag2

- Rover Key Maker

- Mercedes cars key maker

- Opel key maker

- Toyota key maker

- Renault cars key maker

- Ford cars key maker

- Dacia key maker

- Citroën key maker

- Peugeot key maker

- Alfa Romeo key maker

- Lancia key maker

- Nissan key maker

- Vovo key maker

- BCM key maker (Audi A4, A5, Q5)

Includes the following software:

- Toyota key maker

- SLK02 maker

- SLK03 maker

- SLK04 maker

- SLK05 maker

- Toyota Image Generator G keys

- Toyota Image Generator H keys

- Toyota OBD Reset

- Toyota Dump editor

VVDI2 remote key programmer.

It includes basic software + Tango.

Once you purchase it, you will receive free and frequent updates, adding new features and improving the ones already available

Manual key cutting machine Condor XC-009.

It has an ergonomic design and it s built in high quality materials

Excellent device for VAN or workshop, can cut up to 100 keys with 1 battery power charging.

Handy Baby is the fastest and easy to use cloning device.

Language: English.

Handy Baby is able to copy all kind of transponders (4C/4D/46/48).

It can make copies of ID48 transponders of Honda, Fiat, VAG Group until 2005 and some Volvo models. It also copies all ID46, T5, 4D and 4C and new transponders ID67G for Toyota.

Its weight is very light, the battery is rechargeable and you can use with just one hand.

You can also read the frequency of the remote keys and it can also work as a coil detector.

Handy Baby recognizes teh following transponder chips: 13, 40/41/42/44/45, 4C/46/48, 4D61/62/63/67/68/68+/71.

https://www.youtube.com/watch?v=zkovZdVhtWY

Card key with 3 buttons for Renault Megane II and Scenic (2003-2008)

Key blade included

Renault part number: 7701209132, 285973920R

Transponder PCF7947 (ID46)

NOTE: This is not a "hands-free" card. If you need one of these, Key-Code's part number is RN101TJ02

433 mhz