Remote key programmer CK-100

KD Entry is an equipment for oppening vehicules using the cell phone.

OBD cable for KD Entry.

The TDB007 Peugeot and Citroen Pin Code Wizard is a simple and easy device to extract the pin code from a range of vehicles. It can read the pin code from the ECU memory of all Engine Control Units, Sagem, Johnson Controls and Valeo BSI units.

The device has two modes of operation :

- Working Key Mode : The device can read the pin code from the vehicle immobiliser BSI memory when a working key is available, within 5 minutes.

- Lost Key Mode : The device can read the pin code from the vehicle immobiliser BSI memory when there are no working keys, the time taken depends on the vehicle type and system, but typically takes between 15 and 90 minutes.

The TDB007 has a small backlit LCD display, small keypad to navigate the menu, a rear magnet to aid testing and secure the device when working under the bonnet/hood, an OBD Connector and cable and an additional cable/connectors for working with vehicles that do not have CAN BUS located within the OBD Diagnostic connector.

APPLICATIONS:

- The device can work on all Peugeot and Citroen based models from 2001 to 2015 as listed in the applications guide on our web site. The applications are updated on a regular basis, so please always refer to the latest version to ensure you have the up to date information before you attempt to read the pin code.

- The device works on vehicles from 2005/2006 using the OBD port if CAN bus is available at the vehicle OBD connector, however for vehicles prior to this a direct connection can be made to the engine ECU connector CAN wires to enable communication with the BSI immobiliser ECU.

- The device will only work on Peugeot and Citroen derived models, and cannot read the pin code on Fiat or Toyota derived models such as the 107, C1 and Scudo as examples.

This device is able to program keys and remotes with Toyota G and H (4D/67/68/72G) transponder chips directly via OBD connection socket. No extra software, hardwares or laptops are required.

It covers all vehicles with G and H chips manufactured by Toyota between 1996 and 2015 when there is no total loss of keys. It only works when we want to add a new key.

The process is easy and fast. You can find attached an users guide that will guide you through the process.

With this tool you will be able to get Ford and Mazda PIN Codes. No extra hardware or software is required

You just need to plug the PIN Code Reador to car's OBD2 socket and you will be able to get 4 or 6 digit PIN Codes for most vehicles up to 2014.

It includes 50 free tokens and software updates are free of charge

VAG Tacho allows user to read security codes on dashboards, program new keys and modify information.

VAGTacho is used to repair unprogrammed dashboards without diassemble them. You can download all data to a computer and the work on it.

It works with Windows 7, tanto en 32 como en 64 bit.

PIN code generator for KIA, Hyundai and Nissan.

With this device you will be able to obtain 5 daily codes without any extra charges or token fee: You just have to purchase the product for the first time and you will get 5 codes everyday for free.

It supports all Hyundai and KIA models from 1996 until 2016. You can also get glovebox codes for Nissan.

Installation is automatic and you can use it on Windows Vista, Windows 7, Windows 10, Windows 8, Windows 8.1, Linux y MacOS.

From the year 1994 most Renault cars are equipped with engine immobilizer system and it makes replacement of injection computer more complicated. There is no problem if replacement ECU is bought from Renault service dealer - it is sold with no immobilizer code stored, but replacing damaged computer with used one is impossible because of mismatch of unlocking codes.

Decoding tool has several modes of operation and deals with all known petrol and diesel injection systems, introduced in range of year 1994-2001 without intervention in to the ECU (diesel coded anti-start valve as well). After decoding process is completed, control unit became de coded - as it was bought from dealer. ECU must be taken out from the car and connected to the decoding tool according to user manual.

Tested System for Renault ECU Decoder:

Petrol:

- Siemens Fenix3

- Siemens Fenix5

- Siemens Sirius32

- Sagem Safir(55pin)

- Sagem Safir2(55pin)

- Bosch Motronic MP7.0

- Magneti Marelli IAW 06R

Diesel:

- Bosch MSA 15.5(DTI)

- BOSCH EDC15C3(DCI)

- LUCAS DCU3R(1.9D)

- Code Fuel Cut-off valve(1.9D DDS)

Decoding of engine control units manufactured in range of year 1994-1996 is semi-automatic, from year 1996 - fully automated. Especially this tool can be useful when rubber-filled FENIX5, SAFIR2 or coded diesel anti-start valve must be decoded. This tool will decode all listed type 1 and 2 immobilizer systems..

Buying this tool you will be supplied with all required information: user manual and connection diagrams. Decoding tool is stand-alone, no PC is required.

The following ECU’s will need a valid immo code:

- Some of FENIX5 for LAGUNA/SAFRANE 2.0l 16V

All of SIRIUS32 except for KANGOO 1.4l 16V - You can attach the immo emulator on this ECU after decoding

LUCAS DCU3R, Bosch MSA15.5 and EDC15C3

This means that after the decoding procedure on one of these ECU is done, you must have the immobilizer system fully operational (matching key) to start the engine.Otherwise after decoding the above ECU’s you can use a Renault emulator

Universal Can Filter blockage KM and Read (some models)

Supported models:

Renault

Renault blockage KM in ABS

Laguna 3 blockage KM in ABS

Megane 3 blockage KM in ABS

Scenic blockage KM in ABS

Fluence blockage KM in ABS

Mercedes

W205 (C-klasa) Block synchro EZS-DASH *

W222 (S-klasa) Block synchro EZS-DASH *

W447 (Vito) Block synchro EZS-DASH *

W205 (C-klasa) Block Read orginal Km from EZS by Diag (read from EZS is same as from DashBoard) *

W222 (S-klasa) Block Read orginal Km from EZS by Diag (read from EZS is same as from DashBoard) *

W447 (Vito) Block Read orginal Km from EZS by Diag (read from EZS is same as from DashBoard) *

(*options available from 05.05.2016)

W204 1pcs. Can Filter blockage KM and Read in the ignition

W212 1pcs. Can Filter blockage KM and Read in the ignition

W221 1pcs. Can Filter blockage KM and Read in the ignition

W166 1pcs. Can Filter blockage KM, 2pcs. Can Filter blockage KM and Read in the ignition

W205 1pcs. Can Filter blockage KM, 2pcs. Can Filter blockage KM and Read in the ignition

W222 1pcs. Can Filter blockage KM, 2pcs. Can Filter blockage KM and Read in the ignition

Vito model 2015 1pcs. Can Filter blockage KM, 2psc. Can Filter blockage KM and Read in the ignition

A KLASE model 2015 1pcs. Can Filter blockage KM, 2pcs. Can Filter blockage KM and Read in the ignition

B KLASE model 2015 1pcs. Can Filter blockage KM, 2pcs. Can Filter blockage KM and Read in the ignition

BMW

CAS- founded in CAS blockage KM and Read

DashBoard- founded in DashBoard blockage KM

FEM- founded in FEM blockage KM

Universal Can Filter blockage KM and Read (some models)

Supported models:

Renault

Renault blockage KM in ABS

Laguna 3 blockage KM in ABS

Megane 3 blockage KM in ABS

Scenic blockage KM in ABS

Fluence blockage KM in ABS

Mercedes

W205 (C-klasa) Block synchro EZS-DASH *

W222 (S-klasa) Block synchro EZS-DASH *

W447 (Vito) Block synchro EZS-DASH *

W205 (C-klasa) Block Read orginal Km from EZS by Diag (read from EZS is same as from DashBoard) *

W222 (S-klasa) Block Read orginal Km from EZS by Diag (read from EZS is same as from DashBoard) *

W447 (Vito) Block Read orginal Km from EZS by Diag (read from EZS is same as from DashBoard) *

(*options available from 05.05.2016)

W204 1pcs. Can Filter blockage KM and Read in the ignition

W212 1pcs. Can Filter blockage KM and Read in the ignition

W221 1pcs. Can Filter blockage KM and Read in the ignition

W166 1pcs. Can Filter blockage KM, 2pcs. Can Filter blockage KM and Read in the ignition

W205 1pcs. Can Filter blockage KM, 2pcs. Can Filter blockage KM and Read in the ignition

W222 1pcs. Can Filter blockage KM, 2pcs. Can Filter blockage KM and Read in the ignition

Vito model 2015 1pcs. Can Filter blockage KM, 2psc. Can Filter blockage KM and Read in the ignition

A KLASE model 2015 1pcs. Can Filter blockage KM, 2pcs. Can Filter blockage KM and Read in the ignition

B KLASE model 2015 1pcs. Can Filter blockage KM, 2pcs. Can Filter blockage KM and Read in the ignition

BMW

CAS- founded in CAS blockage KM and Read

DashBoard- founded in DashBoard blockage KM

FEM- founded in FEM blockage KM

BMW AK90 Key Programmer for BMW EWS. THE ONLY ONE CAPABLE OF PROGRAMMING EWS2.

Description:

It can be used in models between 1995 and 2009 which use EWS system. Improved some of the EWS to read and write speed. This product is safe and effective. Is the key to match the best tool for BMW.

Functions:

1. Directly reading data dumps from MCU which marked 1D47J , 2D47J , 0D46J ,2L86D without removing MCU from circuit board , easy to do yourself.

2. With the help of software you can renew , lock or unlock keys as well.

3. Programming original chips "EML 10030A" for making keys .

4. Identifying keys for all EWS and CAS , showing VIN , key No. It can change VIN, can change mileage in ews.

The lastest update software version is V3.16 for EWS4.4. Includes EWS2.1/EWS2.2/EWS3/EWS3.3/EWS4/EWS4.4

Package list:

- 1pc x AK90 Host

- 1pc x AK90 10 Pin Cable

- 1pc x AK90-Chip data to read specific seat

- 1pc x AK90 USB communication cable

You will be able to program and test:

- ECU.

- BSI

- UCH.

- Boards.

- Keys.

- Can Net.

- All component of multiplexed networks.

ADVANTAGES