Toyota G software update for Handy Baby cloning device.
This software can perform copies of transponders ID48 and ID48 96 bits
This device uses a system of tokens and points as follows:
- For every cloning you spend1 token. Price per token is 8 €.
- However, you can get points by purchasing VVDI remotes. Software comes tiwh 1500 free points.
- Every token equals 100 points.
By purchasing this program, you wil also get MQB key programming software for free.
- ID 48 CAN needs 4th generation Immo software, PIN code and CS reading from ECU and 48 emulator cable. It supports total loss and keyless go withour desoldering or removing module. It covers for example, VW Scirocco, Audi A3 and 24C64 and 24C32 boards.
- ID48 69 bits needs a working key on vehicle and information collected from vehicle's ignition. You can only add new keys and doesn't support MQB.
We recommend transponders ME008TR00.
TKM. Xtreme Kit is the first system in the world that can clone Volkswagen, AUdi, Seat, Skoda, Volvo, Honda, BMW, Mercedes keys and all Megamos® Crypto (ID48) transponder car keys up to 2016.
The extraordinary performance of the Keyline cloning devices make for an exceptional level of flexibility, that widens considerably their range of action cloning more than 200 models available to date: 884 Decryptor Mini with the latest generation Keyline Cloning Tool App and 884 Decryptor Ultegra with the powerful Keyline software.
TKM. Xtreme Kit makes it possible to clone the Megamos® Crypto transponders of 34 car brands, including several Volkswagen, Audi, Seat, Škoda, Porsche, Alfa Romeo, Buick, Cadillac, Chevrolet, Citroën, Daewoo, Daf, Fiat, Ferrari, GMC, Great Wall, Holden, Honda, Infiniti, Isuzu, Iveco, Jaguar, Kia, Lamborghini, Lancia, Lexus, Maserati, Mitsubishi, Opel, Peugeot, Pontiac, Proton, SsangYong and Volvo models, for a total of more than 200 models available to date.
TKM. Xtreme Kit is a software update that enables the cloning of all Megamos® Crypto transponders with TKM heads or GKM chips.
The cloning process can be started simply by inserting in your device the TKM. Xtreme electronic head, which can subsequently be reused as a standard new head.
Thanks to TKM. Xtreme Kit, now 884 Decryptor Mini and 884 Decryptor Ultegra can clone almost 2000 car models: up to 95% of the cars, trucks and motorbikes from the past 20 years still in operation.
EEPROM Xtra. Kit is the safest professional solution to create one or more transponder key copies when the original key is not available.
By updating the 884 Decryptor Mini and the 884 Decryptor Ultegrawith EEPROM Xtra. Kit, you add the Windows 7 or higher-compatible EEPROM Xtra menu to the Keyline Cloning Tool software. In this way, you will be able to transcribe the key data as stored in the EEPROM memory of the vehicle onto a new Keyline transponder, without the need of any diagnostic device*.
A quality choice. EEPROM Xtra maximises the versatility of the 884 Decryptor Mini and 884 Decryptor Ultegra. It uses Keyline technology exclusively, including the GK100, GKM, CK100, CKG and CK50 chips and the TK50, TK100, TKM and TKG electronic heads, to ensure maximum quality and top performance.
Maximum security. Different from other solutions in the market, EEPROM Xtra does not alter the information stored in the EEPROM memory, as it does not rewrite its data. If the lost key is found again, it will still be usable, just like the copies made.
Large database. With a large database of models of cars, motorbikes, commercial vehicles and trucks, EEPROM Xtra makes it possible to clone the most common keys in the world.
Complete and cost-efficient. EEPROM Xtra does not require purchase of tokens or additional modules in order to complete the key creation process, thus ensuring a considerable savings. A solution that offers maximum performance and no surprises.
Compatible with all key programming devices
Tango programmer is a new generation of transponder programmer which is developed to read, write and generate the latest transponders used in the latest vehicle immobilizer technologies.
After generating a new transponder with TANGO Programmer, you will not need any additional diagnostic equipment to program the generated transponder to the car! It will start the car directly.
It includes the following software:
Opel key maker
Mercedes cars key maker
Mercedes trucks key maker
Toyota key maker
Honda motorcycles (HITAG2) key maker
Chrysler key maker
Renault cars key maker
Renault trucks key maker
Rover key maker
Iveco trucks key maker
Ford cars key maker
Chevrolet (GMC) key maker
Dacia key maker
Citroen key maker
Fiat key maker
Isuzu key maker
Peugeot key maker
Ducati key maker
Cadillac key maker
Gilera & Piaggio (ST10..MCU) key maker key maker
Alfa Romeo key maker
Lancia key maker
Dodge key maker
Daihatsu key maker
Suzuki key maker
Ferrari key maker
Jeep key maker
Nissan key maker
Volvo key maker
Component Security Viewer
Synchro maker Volvo
Dump editor BCM2
Reset of Toyota/Lexus/Subaru Smart Keys 40,80,128 bit
Toyota Image Generator G-KeysPage1 36,56,96,37,57
Toyota+: OBD Reset European cars based on G-immoboxes
Toyota Dump Editor – Synchro Engine ECU, Smartkey ECU, ID Code Box, Steering Lock ECU
Daihatsu Image Generator G-Keys
BMW motorcyles (DST80) key maker
Toyota Image Generator H-Keys: Page1 39, 59, 5A, 99
BCM2 key maker (Audi A4/A5/Q5)
This software upgrades your VVDI2 from basic to full software.
Included following features: VAG, BMW OBD, BMW CAS4+, Immo 5th
FEM, MQB and ID48 CLONING ARE NOT INCLUDED
Includes the following software:
- Rover Key Maker
- Mercedes cars key maker
- Opel key maker
- Toyota key maker
- Renault cars key maker
- Ford cars key maker
- Dacia key maker
- Citroën key maker
- Peugeot key maker
- Alfa Romeo key maker
- Lancia key maker
- Nissan key maker
- Vovo key maker
- BCM key maker (Audi A4, A5, Q5)
Includes the following software:
- Toyota key maker
- SLK02 maker
- SLK03 maker
- SLK04 maker
- SLK05 maker
- Toyota Image Generator G keys
- Toyota Image Generator H keys
- Toyota OBD Reset
- Toyota Dump editor
Super VAG Key is the new key and remotes programming software for the VAG Group vehicles.
Super VAG Key allows you to program keys and remotes of vehicles Volkswagen, Audi, Skoda and Seat manufactured between 1998 and 2014
ATTENTION!!! NEW SUPER VAG KEY UPDATE AVAILABLE
It supports Volkswagen, Seat and Skoda vehicles from 2009 to 2014 withr NEC processor and board VDO or MM5/7: Golf, Jetta, Passat, Gol, Spacefox, Saveiro, Octavia, Rapid, Yeti, Up, Citigo, Mii, Leon...
This program does not use any extra hardware for functioning. You just need to install Super VAG Key in your computer. The info obtained will be transferred to a transponder using a cloning or programming device, such us Touchclone.
Super VAG's interface is simple and user friendly. Here are some operations that can be performed with Super VAG Key:
- Pre-programming transponder chips
- Key programming
- Reading of immobiliser status
- Vehicle scanning tool
- It reads and deletes error codes
The following features will be included soon:
- Immobiliser recognition
- New interface
- Increase of dashboard database
- Heuristic analysis(PIN code reading in unknown dasboards)
Super VAG has a technical support department and you will get free updates with your anual subscription. You will receive one year of free updates when you buy Super VAG Key for the first time. You will have the chance to renew your subscription for only 160 € per year (only 13,35 € per month)
Compatible with Touchclone and SKP-900.
The TDB007 Peugeot and Citroen Pin Code Wizard is a simple and easy device to extract the pin code from a range of vehicles. It can read the pin code from the ECU memory of all Engine Control Units, Sagem, Johnson Controls and Valeo BSI units.
The device has two modes of operation :
- Working Key Mode : The device can read the pin code from the vehicle immobiliser BSI memory when a working key is available, within 5 minutes.
- Lost Key Mode : The device can read the pin code from the vehicle immobiliser BSI memory when there are no working keys, the time taken depends on the vehicle type and system, but typically takes between 15 and 90 minutes.
The TDB007 has a small backlit LCD display, small keypad to navigate the menu, a rear magnet to aid testing and secure the device when working under the bonnet/hood, an OBD Connector and cable and an additional cable/connectors for working with vehicles that do not have CAN BUS located within the OBD Diagnostic connector.
- The device can work on all Peugeot and Citroen based models from 2001 to 2015 as listed in the applications guide on our web site. The applications are updated on a regular basis, so please always refer to the latest version to ensure you have the up to date information before you attempt to read the pin code.
- The device works on vehicles from 2005/2006 using the OBD port if CAN bus is available at the vehicle OBD connector, however for vehicles prior to this a direct connection can be made to the engine ECU connector CAN wires to enable communication with the BSI immobiliser ECU.
- The device will only work on Peugeot and Citroen derived models, and cannot read the pin code on Fiat or Toyota derived models such as the 107, C1 and Scudo as examples.
Handy Baby is the fastest and easy to use cloning device.
Handy Baby is able to copy all kind of transponders (4C/4D/46/48).
It can make copies of ID48 transponders of Honda, Fiat, VAG Group until 2005 and some Volvo models. It also copies all ID46, T5, 4D and 4C and new transponders ID67G for Toyota.
Its weight is very light, the battery is rechargeable and you can use with just one hand.
You can also read the frequency of the remote keys and it can also work as a coil detector.
Handy Baby recognizes teh following transponder chips: 13, 40/41/42/44/45, 4C/46/48, 4D61/62/63/67/68/68+/71.
This set includes Bluetooth battery with Bluetooth technology and software for precoding Fiat keys.
Keyline BLUETOOTH & POWER ADAPTOR is the next-generation rechargeable battery with Bluetooth technology to use 884 Decryptor Mini wirelessly. There are many advantages: perfect integration, no need for power cables and longer duration of use. Maximum flexibility.
With Bluetooth & Power Adaptor, 884 Decryptor Mini can be managed from any smartphone and tablet*, Android and iOS**, thus opening the door to cloning with Apple devices.
Its stable and long-term charge (up to 10 hours with continuous use) makes 884 Decryptor Mini even more flexible and able to meet the needs of all automotive specialists that want to offer a cloning service anywhere.
Use is immediate: enable the Bluetooth connection on your smartphone or tablet and access the Keyline Cloning Tool App; 884 Decryptor Mini and the battery will automatically be recognized by your device allowing you to immediately start cloning wirelessly. At the first power, please select the 884 Decryptor Mini with which you want to connect, in the menu "Cloning devices", then save the Bluetooth & Power Adaptor in the menu "My Products".
Bluetooth & Power Adaptor is easy and rechargeable via PC connection (Windows or Mac) or battery power. In addition, during charging, 884 Decryptor Mini can be used continuously.