MERCEDES WSP CABLE SET
This is an optional cable to use emulator who replace the vehicule original WSP
Works emulating the comunication CANB Bus between the immo WSP and the vehicule ECU. avaible with CDI1 et CDI2
Ref: MR_WSPCABLE
-
0034910228127 | europe@key-code.comOur delivery process will follow the required steps to assure the health of our workers, couriers and customers - Hours: 9:00 - 18:00hrs
Emulators
32 Products
Emulators
Sort by:
VAG IMMO EMULATOR
This tool is able to emulate good working immobiliser for any VW, Audi, Seat, Skoda engine control unit (including diesel pumps) to year 2000 (all kind of IMMO1 and IMMO2).
This tool can by useful for car tuning specialist, when new type motor are installed in old vehicle and you need disable original immobiliser function in engine ECU.
Can replace defective immobiliser unit (very common problem in older cars) on VW Golf III, Passat B4-B5 to year 2000 , Sharan 1996 - 2001, T4, T5 to year 2000, Seat to year 2001, Skoda to year 2001.
Ref: VAG_EMULATOR
MERCEDES ESL EMULATOR ID46
Suitable for: W208, W203, W209, W210, W211, W639, A Class and new Sprinter W906
Ref: MR_ESL_EMU02
RENAULT CAN IMMO EMULATOR 937-212
Suitable for Kangoo, Clio II, VelSatis, Master, Trafic and Laguna II
Ref: RN_EMULATOR_CAN
RENAULT ESL EMULATOR
This ESL emulator can be used in the following vehicles:
- Laguna II-III
- Megane II-III
- Clio III-IV
- Captur
- Scénic II-III
- Fluence II-III
Ref: RN_ESL_EMULATOR
MERCEDES SPRINTER, CRAFTER, W169, W245, W202, W203, W208, W209, W210, W211, VITO, W639, W906 ESL, ELV EMULATOR
ESL and ELV Emulator for Mercedes Sprinter W906, Crafter, Class A W196, Class B W245, Class C W202, Class C W203, CLK W209, Class E W210 and W211, Vito and Viano W639
Ref: MR_ELV_EMU02
Key Line
VOLVO KEYLESS REMOTE EMULATOR VL100KIT BY KEYLINE
It gives you the possibility of cloning the Volvo Keyless system. It includes the VL100 fob and the VL22P key.
Suitable for the following vehicles:
- V70 (2008-2011)
- XC70 (2008-2011)
- S80 (2008-2011)
Ref: VL100KIT
Key Line
TOYOTA PRIUS (2004-2009) KEYLESS REMOTE EMULATOR TR100KIT BY KEYLINE
It gives you the possibility of cloning the Toyota Pirus (2004-2009) Keyless system. It includes the TR100 fob and the TR22P key.
Ref: TR100KIT
Key Line
TOYOTA YARIS (2010-2012) TRY100KIT KEYLESS REMOTE EMULATOR TRY100KIT BY KEYLINE
It gives you the possibility of cloning the Toyota Yaris (2010-2012) Keyless system. It includes the TK100UNL fob and the TRY22P key.
Ref: TRY100KIT
Key Line
CHRYSLER, JEEP, DODGE AND REAM FOBIK REMOTE EMULATOR Y100KIT BY KEYLINE
It gives you the possibility of cloning the Chryser, Jeep, Dodge and Ram Fobik system. It includes the Y100 fob and the Y59P key.
Suitable for the following vehicles:
- Jeep Commander (2013)
- Jeep Grand Chrokee (2006-2010)
- RAM 1500 (2011-2012)
- RAM 2500, 3500 Heavy Duty (2006-2010)
- RAM 3500, 4500, 5500 (2011)
- Chrysler 300, 300c (2008-2010)
- Chrysler Town & Country (2008-2013)
- Dodge Challenger (2008-2012)
- Dodge Charger (2008-2010)
- Dodge Dart(2013)
- Dodge Durango (2011-2012)
- Dodge Grand Caravan (2008-2013)
- Dodge Journey (2009-2010)
- Dodge Magnum (2008)
- Dodge Ram 1500 (2009)
Ref: Y100KIT
Key Line
VOLKSWAGEN PASSAT (2006-2013) KEYLESS REMOTE EMULATOR VWMKIT BY KEYLINE
This kit lets you copy the Volkswagen Passat (2006-2013) Keyless system. It includes the VWM, that is equipped with the Keyline technology for Megamos® Crypto* (ID48) transponder cloning and the V66P mechanical key.
Ref: VWMKIT
Key Line
VOLVO DASH REMOTE KEY EMULATOR VLMKIT BY KEYLINE
It gives you the possibility of cloning the Volvo dash remotes. It includes the VLM fob and the VL22P key.
Suitable for the following vehicles:
- C30 (2008-...)
- S40 (2008-...)
- S80 (1999-...)
- V40 (2012-...)
- V50 (2004-...)
Ref: VLMKIT
Key Line
HYUNDAI, KIA KEYLESS REMOTE EMULATOR KIHY100KIT BY KEYLINE
It gives you the possibility of cloning the Hyundai and KIA Keyless system. It includes the KI100 fob, the HY22P key and the KI22P key.
Suitable for the following vehicles:
- KIA Sorento (2010-2012)
- KIA Sportage (2010-2012)
- KIA Ceed (2011-...)
- KIA Soul (2011-...)
- Hyundai Santa Fe (2011-2012)
- Hyundai Sonata (2011-...)
Ref: KIHY100KIT
Key Line
BMW KEYLESS REMOTE EMULATOR BM100KIT BY KEYLINE
It gives you the possibility of cloning the BMW Keyless system. It includes the BM100 fob and the BMW2P key.
Suitable for the following vehicles:
- Serie 1 (2007-2010)
- Serie 3 (2005-2011)
- Serie 5 (2004-2010)
- Serie 6 (2004-2010)
- X1 (20009-2011)
- X5 (2007-2011)
Ref: BM100KIT
Filter By
On sale
IO TERMINAL FULL VERSION (SIEMENS, MARELLI, BOSCH, DENSO, FIAT BSI, OPEL, VOLVO, PSA, MOTO, SMART SAM)
SIEMENS (simcard)
MARELLI+MARELLI2 (activation/simcard)
BOSCH (simcard)
DENSO (simcard)
VAGDSG+EASYTRONIC (activation/simcard)
FIATBSI TOOL (simcard)
MOTORCYCLE ECU TOOL (simcard)
VOLVO TOOL (simcard)
MULTITOOL PSA BSI
MULTITOOL SMART SAM (activation/simcard)
MULTITOOL FIAT BSI2 (activation/simcard)
MULTITOOL OPELBCM (activation/simcard)
MULTITOOL OPEL/GMECU (activation/simcard)
MULTITOOL OPEL/GMTCM (activation/simcard
MULTITOOL OPEL/GMEPS (activation/simcard)
Ref: IO-TERMINAL-FULL
IO TERMINAL PACK BSI-BCM (FIAT, SMART, PSA, OPEL BCM)
FIATBSI TOOL (simcard)
MULTITOOL PSA BSI
MULTITOOL SMART SAM (activation/simcard)
MULTITOOL FIAT BSI2 (activation/simcard)
MULTITOOL OPELBCM (activation/simcard)
Ref: IO-TERMINAL-BSI-BCM
MANUAL KEY CUTTING MACHINE PANTHER SX WITH 2 JAW - CARS + HOUSE KEYS MN-2050
The Panther SX is a high quality key machine able to cut lazer and dimple keys with precision and simplicity with the added benefit of carrier locks to aid control or certain applications. In addition the clamps on the SX version can be angle through 45 degrees to enable angled cuts to be performed.
The Panther range of key cutting machines offer a high quality and robust design offering excellent precision and long term performance in even the busiest key cutting centres. The ergonomic design and broad base gives the machine a stable operation and accurate. The most striking feature of this series of machines is the versatility and accuracy built into this machine that an only be matched by machines that a far more expensive.
The ball bearing chassis offers the highest accuracy, smooth operation and support whilst being total maintenance free. The rotary level enables the spring tension to adjusted to your preferred settings. The level control offers a smooth and precise feel that gives the operator confidence in the milling process.
Thanks to the electronic control supported adjustment system the calibration can be completed in a few steps and offer an accuracy of 0.01mm. The correct setting is detailed with a go/no go warning light calibration system that assists easy and rapid calibration. Both the X and Y axis can be locked in any position by simply tightening the control level.
An LED illumination strip built into the roof of the body and directed at the cutter / jaw area offers excellent visibility of the work in all ambient light conditions.
The tracer can be lowered to the work to enable the centre to be identified and the position of the tracer pre checked without the cutting mill touching the new key. Once confirmed can be locked back in the calibrated position. Once the cutter is lowered to the work the handle can be rotated and lock to the depth of the required milling, this enables the calibrated depth to be maintained.
The highly accurate clamping system has 3 different positions to offer the greatest flexibility of key clamping. The jaws included graded position and stop positioning. The quick clamps offer rapid and accurate clamping of the work.
The cutting tools are conveniently stored in the toolbox in the front of the machine.
The Panther is CE approved and equipped with a safety shield over the cutting blade which protects the operator and deflects displaced metal.
TECHNICAL SPECIFICATIONS:
Height: 34x30x42
Engine power:150W
Noise: 64dB.
Weight: 20 Kg.
RPM: 5800 r.pm. 150W
220V
Ref: PANTHER-TOTAL
Key Line
BLUETOOTH KIT FOR KEYLINE 884 DECRYPTOR MINI + FIAT PRECODING SOFTWARE
This set includes Bluetooth battery with Bluetooth technology and software for precoding Fiat keys.
Keyline BLUETOOTH & POWER ADAPTOR is the next-generation rechargeable battery with Bluetooth technology to use 884 Decryptor Mini wirelessly. There are many advantages: perfect integration, no need for power cables and longer duration of use. Maximum flexibility.
With Bluetooth & Power Adaptor, 884 Decryptor Mini can be managed from any smartphone and tablet*, Android and iOS**, thus opening the door to cloning with Apple devices.
Its stable and long-term charge (up to 10 hours with continuous use) makes 884 Decryptor Mini even more flexible and able to meet the needs of all automotive specialists that want to offer a cloning service anywhere.
Use is immediate: enable the Bluetooth connection on your smartphone or tablet and access the Keyline Cloning Tool App; 884 Decryptor Mini and the battery will automatically be recognized by your device allowing you to immediately start cloning wirelessly. At the first power, please select the 884 Decryptor Mini with which you want to connect, in the menu "Cloning devices", then save the Bluetooth & Power Adaptor in the menu "My Products".
Bluetooth & Power Adaptor is easy and rechargeable via PC connection (Windows or Mac) or battery power. In addition, during charging, 884 Decryptor Mini can be used continuously.
Ref: BTP-884-PACK
GENUINE KEYLESS REMOTE KEY WITH 2 BUTTONS FOR TOYOTA COROLLA VERSO (899040F010) ID6B 6F
Keyless remote key used in the following Toyota Corolla Verso vehicles:
- AUR20: VIN R001001 - R999999
- AUR21: VIN R001001 - R999999
- ZGR20: VIN R001001 - R999999
- ZGR21: VIN R001001 - R999999
Genuine part number: 899040F010
Written on the back: Morocco MR4134/2008
Transponder: ID6B6F DST+
Page 1: 98
Emergency key blade not included
433 Mhz
Ref: TO101TE02-OEM
