Tango programmer is a new generation of transponder programmer which is developed to read, write and generate the latest transponders used in the latest vehicle immobilizer technologies.

After generating a new transponder with TANGO Programmer, you will not need any additional diagnostic equipment to program the generated transponder to the car! It will start the car directly.

It includes the following software:

HITAG2

Opel key maker

Mercedes cars key maker

Mercedes trucks key maker

Toyota key maker

Honda motorcycles (HITAG2) key maker

Chrysler key maker

Renault cars key maker

Renault trucks key maker

Rover key maker

Iveco trucks key maker

Ford cars key maker

Chevrolet (GMC) key maker

Dacia key maker

Citroen key maker

Fiat key maker

Isuzu key maker

Peugeot key maker

Ducati key maker

Cadillac key maker

Gilera & Piaggio (ST10..MCU) key maker key maker

Alfa Romeo key maker

Lancia key maker

Dodge key maker

Daihatsu key maker

Suzuki key maker

Ferrari key maker

Jeep key maker

Nissan key maker

Volvo key maker

Component Security Viewer

Synchro maker Volvo

Dump editor BCM2

Reset of Toyota/Lexus/Subaru Smart Keys 40,80,128 bit

SLK-02 maker

SLK-03 maker

SLK-04 maker

SLK-05 maker

Toyota Image Generator G-KeysPage1 36,56,96,37,57

Toyota+: OBD Reset European cars based on G-immoboxes

Toyota Dump Editor – Synchro Engine ECU, Smartkey ECU, ID Code Box, Steering Lock ECU

Daihatsu Image Generator G-Keys

BMW motorcyles (DST80) key maker

Toyota Image Generator H-Keys: Page1 39, 59, 5A, 99

BCM2 key maker (Audi A4/A5/Q5)

This software upgrades your VVDI2 from basic to full software.

FEM, MQB and ID48 CLONING ARE NOT INCLUDED

Includes the following software:

- Hitag2

- Rover Key Maker

- Mercedes cars key maker

- Opel key maker

- Toyota key maker

- Renault cars key maker

- Ford cars key maker

- Dacia key maker

- Citroën key maker

- Peugeot key maker

- Alfa Romeo key maker

- Lancia key maker

- Nissan key maker

- Vovo key maker

- BCM key maker (Audi A4, A5, Q5)

Includes the following software:

- Toyota key maker

- SLK02 maker

- SLK03 maker

- SLK04 maker

- SLK05 maker

- Toyota Image Generator G keys

- Toyota Image Generator H keys

- Toyota OBD Reset

- Toyota Dump editor

Super VAG Key is the new key and remotes programming software for the VAG Group vehicles.

Super VAG Key allows you to program keys and remotes of vehicles Volkswagen, Audi, Skoda and Seat manufactured between 1998 and 2014

ATTENTION!!! NEW SUPER VAG KEY UPDATE AVAILABLE

It supports Volkswagen, Seat and Skoda vehicles from 2009 to 2014 withr NEC processor and board VDO or MM5/7: Golf, Jetta, Passat, Gol, Spacefox, Saveiro, Octavia, Rapid, Yeti, Up, Citigo, Mii, Leon...

https://www.youtube.com/watch?v=Sc6pnAuUrHQ&feature=youtu.be

This program does not use any extra hardware for functioning. You just need to install Super VAG Key in your computer. The info obtained will be transferred to a transponder using a cloning or programming device, such us Touchclone.

Super VAG's interface is simple and user friendly. Here are some operations that can be performed with Super VAG Key:

- Pre-programming transponder chips

- Key programming

- Reading of immobiliser status

- Vehicle scanning tool

- It reads and deletes error codes

The following features will be included soon:

- Immobiliser recognition

- New interface

- Increase of dashboard database

- Heuristic analysis(PIN code reading in unknown dasboards)

Super VAG has a technical support department and you will get free updates with your anual subscription. You will receive one year of free updates when you buy Super VAG Key for the first time. You will have the chance to renew your subscription for only 160 € per year (only 13,35 € per month)

Compatible with Touchclone and SKP-900.

The TDB007 Peugeot and Citroen Pin Code Wizard is a simple and easy device to extract the pin code from a range of vehicles. It can read the pin code from the ECU memory of all Engine Control Units, Sagem, Johnson Controls and Valeo BSI units.

The device has two modes of operation :

- Working Key Mode : The device can read the pin code from the vehicle immobiliser BSI memory when a working key is available, within 5 minutes.

- Lost Key Mode : The device can read the pin code from the vehicle immobiliser BSI memory when there are no working keys, the time taken depends on the vehicle type and system, but typically takes between 15 and 90 minutes.

The TDB007 has a small backlit LCD display, small keypad to navigate the menu, a rear magnet to aid testing and secure the device when working under the bonnet/hood, an OBD Connector and cable and an additional cable/connectors for working with vehicles that do not have CAN BUS located within the OBD Diagnostic connector.

APPLICATIONS:

- The device can work on all Peugeot and Citroen based models from 2001 to 2015 as listed in the applications guide on our web site. The applications are updated on a regular basis, so please always refer to the latest version to ensure you have the up to date information before you attempt to read the pin code.

- The device works on vehicles from 2005/2006 using the OBD port if CAN bus is available at the vehicle OBD connector, however for vehicles prior to this a direct connection can be made to the engine ECU connector CAN wires to enable communication with the BSI immobiliser ECU.

- The device will only work on Peugeot and Citroen derived models, and cannot read the pin code on Fiat or Toyota derived models such as the 107, C1 and Scudo as examples.

Handy Baby is the fastest and easy to use cloning device.

Language: English.

Handy Baby is able to copy all kind of transponders (4C/4D/46/48).

It can make copies of ID48 transponders of Honda, Fiat, VAG Group until 2005 and some Volvo models. It also copies all ID46, T5, 4D and 4C and new transponders ID67G for Toyota.

Its weight is very light, the battery is rechargeable and you can use with just one hand.

You can also read the frequency of the remote keys and it can also work as a coil detector.

Handy Baby recognizes teh following transponder chips: 13, 40/41/42/44/45, 4C/46/48, 4D61/62/63/67/68/68+/71.

https://www.youtube.com/watch?v=zkovZdVhtWY

This set includes Bluetooth battery with Bluetooth technology and software for precoding Fiat keys.

Keyline BLUETOOTH & POWER ADAPTOR is the next-generation rechargeable battery with Bluetooth technology to use 884 Decryptor Mini wirelessly. There are many advantages: perfect integration, no need for power cables and longer duration of use. Maximum flexibility.

With Bluetooth & Power Adaptor, 884 Decryptor Mini can be managed from any smartphone and tablet*, Android and iOS**, thus opening the door to cloning with Apple devices.

Its stable and long-term charge (up to 10 hours with continuous use) makes 884 Decryptor Mini even more flexible and able to meet the needs of all automotive specialists that want to offer a cloning service anywhere.

Use is immediate: enable the Bluetooth connection on your smartphone or tablet and access the Keyline Cloning Tool App; 884 Decryptor Mini and the battery will automatically be recognized by your device allowing you to immediately start cloning wirelessly. At the first power, please select the 884 Decryptor Mini with which you want to connect, in the menu "Cloning devices", then save the Bluetooth & Power Adaptor in the menu "My Products".

Bluetooth & Power Adaptor is easy and rechargeable via PC connection (Windows or Mac) or battery power. In addition, during charging, 884 Decryptor Mini can be used continuously.