VVDI KEY TOOL KIT OF REMOTE RENEW ADAPTERS (1-12)
Set of 12 adapters to virginize used remote keys.
It supports BMW (2 models), Nissan, Chrysler, Buick, Volvo, Hyundai, Porsche, Audi, Land Rover, Maseratti y Honda.
Ref: VVDI-RENEW
-
0034910228127 | europe@key-code.comOur delivery process will follow the required steps to assure the health of our workers, couriers and customers - Hours: 9:00 - 18:00hrs
Xhorse
11 Products
Xhorse cloning devices
Sort by:
VVDI KEY TOOL SOFTWARE FOR CLONING ID48, ID48 CAN AND ID48 96 BITS CLONING
This software can perform copies of transponders ID48 and ID48 96 bits
This device uses a system of tokens and points as follows:
- For every cloning you spend1 token. Price per token is 8 €.
- However, you can get points by purchasing VVDI remotes. Software comes tiwh 1500 free points.
- Every token equals 100 points.
By purchasing this program, you wil also get MQB key programming software for free.
- ID 48 CAN needs 4th generation Immo software, PIN code and CS reading from ECU and 48 emulator cable. It supports total loss and keyless go withour desoldering or removing module. It covers for example, VW Scirocco, Audi A3 and 24C64 and 24C32 boards.
- ID48 69 bits needs a working key on vehicle and information collected from vehicle's ignition. You can only add new keys and doesn't support MQB.
We recommend transponders ME008TR00.
Ref: VVDIKT-48CLONE
KD-X2 TOOL REMOTE GENERATOR AND TRANSPONDER CLONING DEVICE
KD-X2 can generate and copy transponders and generate automovite and garage remotes, all in one.
This multinfunction device can copy and edit transponders, generate automotive and garage remotes, read frequency and many other functions.
It uses generic transponders or specific for VVDI Key Tool.
MAIN FUNCTIONS:
- Wired and wireless generation of automotive and garage remotes.
- Smartphone simulation.
- Proximity key unlock
- Frequency detection
- Infra red detection
- Access card copy
- Fixed code remote copy
- Copy and generation of chips
- Transponder simulation
- Ignition coil detection
- Remote data backup
- Online remote copy (to be released soon)
- Online copy of 48 96 bits, 46, 4D, Toyota G, etc.
- Additional functions to be released
Ref: KD-X2
VVDI KEY TOOL KIT OF REMOTE RENEW ADAPTERS (13-24)
Set of 12 adapters to virginize used remote keys.
Support Honda (2 types), Nissan (3 types), Chrysler (3 types), Peugeot, Buick (2 types), Mazda
Ref: VVDI-RENEW2
MINI KEY TOOL REMOTE GENERATOR AND TRANSPONDER CLONING DEVICE
VVDI Mini key tool can generate and copy the remote & chip by working together with the mobile phone.
Support normal ID48 transponder.
Mini Key Tool features:
- Can copy transponders
- Works only connected with phone
:- Generates remotes and transponders
:- RF and IR tester
:- Key Cloning ID46/ID4D/ID48/ID4C/ID72/ID70
- Generate various car remotes
- Copy fixed code remotes
- Check remote frequency
Ref: VVDI-KEYTOOL-MINI
KEY TOOL MAX REMOTE GENERATOR AND TRANSPONDER CLONING AND PROGRAMMING DEVICE
Key Tool Max is a prefessional smart device with multi-function, Bluetooth and WiFi communication interface are intergated inside, which is convenient for connecting Xhorse key cutting machine, Mini OBD Tool and other products to do specific operations.
The device adopts HD LCD screen with clear interface, easy to use and flexibility.
Key Tool Max Function:
- Generate remote and smart key
- Program and Immo transponder
- Generate speical transponder
- Renew remote
- Recognize and copy access card
- Generate and copy garage remote
- Frequency detection and copy remote
- Connect to Xhorse key cutting machine
- Special function (VVDI Special TP, Unlock Toyota Smart Key, Special 4D to 4C, ID63 to ID83, VVDI smart key clone, VVDI remote repair calibration etc)
Features:
- 3375mAh battery capacity
- Upto 6 hours battery life
- Upto 5 days standby time
- 1500mAh recharging current
- Brightness upto 400nits
- 1280x720p screen resolution
- 800W camera resolution
Ref: VVDI-KEYTOOL-MAX
REMOTE RENEW AND UNLOCK CABLE FOR VVDI KEY TOOL MINI
This cable is used to unlock remotes with VVDI Mini Key Tool
Ref: VVDI-REN-CABLE
VVDI KEY TOOL MAX SOFTWARE FOR CLONING ID48, ID48 CAN AND ID48 96 BITS CLONING
This software can perform copies of transponders ID48 and ID48 96 bits
This device uses a system of tokens and points as follows:
- For every cloning you spend1 token. Price per token is 8 €.
- However, you can get points by purchasing VVDI remotes. Software comes tiwh 1500 free points.
- Every token equals 100 points.
By purchasing this program, you wil also get MQB key programming software for free.
- ID 48 CAN needs 4th generation Immo software, PIN code and CS reading from ECU and 48 emulator cable. It supports total loss and keyless go withour desoldering or removing module. It covers for example, VW Scirocco, Audi A3 and 24C64 and 24C32 boards.
- ID48 69 bits needs a working key on vehicle and information collected from vehicle's ignition. You can only add new keys and doesn't support MQB.
We recommend transponders ME008TR00.
Ref: VVDIKTMX-48CLONE
Filter By
On sale
IO TERMINAL FULL VERSION (SIEMENS, MARELLI, BOSCH, DENSO, FIAT BSI, OPEL, VOLVO, PSA, MOTO, SMART SAM)
SIEMENS (simcard)
MARELLI+MARELLI2 (activation/simcard)
BOSCH (simcard)
DENSO (simcard)
VAGDSG+EASYTRONIC (activation/simcard)
FIATBSI TOOL (simcard)
MOTORCYCLE ECU TOOL (simcard)
VOLVO TOOL (simcard)
MULTITOOL PSA BSI
MULTITOOL SMART SAM (activation/simcard)
MULTITOOL FIAT BSI2 (activation/simcard)
MULTITOOL OPELBCM (activation/simcard)
MULTITOOL OPEL/GMECU (activation/simcard)
MULTITOOL OPEL/GMTCM (activation/simcard
MULTITOOL OPEL/GMEPS (activation/simcard)
Ref: IO-TERMINAL-FULL
IO TERMINAL PACK BSI-BCM (FIAT, SMART, PSA, OPEL BCM)
FIATBSI TOOL (simcard)
MULTITOOL PSA BSI
MULTITOOL SMART SAM (activation/simcard)
MULTITOOL FIAT BSI2 (activation/simcard)
MULTITOOL OPELBCM (activation/simcard)
Ref: IO-TERMINAL-BSI-BCM
MANUAL KEY CUTTING MACHINE PANTHER SX WITH 2 JAW - CARS + HOUSE KEYS MN-2050
The Panther SX is a high quality key machine able to cut lazer and dimple keys with precision and simplicity with the added benefit of carrier locks to aid control or certain applications. In addition the clamps on the SX version can be angle through 45 degrees to enable angled cuts to be performed.
The Panther range of key cutting machines offer a high quality and robust design offering excellent precision and long term performance in even the busiest key cutting centres. The ergonomic design and broad base gives the machine a stable operation and accurate. The most striking feature of this series of machines is the versatility and accuracy built into this machine that an only be matched by machines that a far more expensive.
The ball bearing chassis offers the highest accuracy, smooth operation and support whilst being total maintenance free. The rotary level enables the spring tension to adjusted to your preferred settings. The level control offers a smooth and precise feel that gives the operator confidence in the milling process.
Thanks to the electronic control supported adjustment system the calibration can be completed in a few steps and offer an accuracy of 0.01mm. The correct setting is detailed with a go/no go warning light calibration system that assists easy and rapid calibration. Both the X and Y axis can be locked in any position by simply tightening the control level.
An LED illumination strip built into the roof of the body and directed at the cutter / jaw area offers excellent visibility of the work in all ambient light conditions.
The tracer can be lowered to the work to enable the centre to be identified and the position of the tracer pre checked without the cutting mill touching the new key. Once confirmed can be locked back in the calibrated position. Once the cutter is lowered to the work the handle can be rotated and lock to the depth of the required milling, this enables the calibrated depth to be maintained.
The highly accurate clamping system has 3 different positions to offer the greatest flexibility of key clamping. The jaws included graded position and stop positioning. The quick clamps offer rapid and accurate clamping of the work.
The cutting tools are conveniently stored in the toolbox in the front of the machine.
The Panther is CE approved and equipped with a safety shield over the cutting blade which protects the operator and deflects displaced metal.
TECHNICAL SPECIFICATIONS:
Height: 34x30x42
Engine power:150W
Noise: 64dB.
Weight: 20 Kg.
RPM: 5800 r.pm. 150W
220V
Ref: PANTHER-TOTAL
- New
IO TERMINAL PACK ECU GEARBOX (SIEMENS, MARELLI, BOSCH, DENSO, OPEL GMECU, OPEL GMTCM, VAG DSG)
SIEMENS (simcard)
MARELLI+MARELLI2 (activation/simcard)
BOSCH (simcard)
DENSO (simcard)
VAGDSG+EASYTRONIC (activation/simcard)
MULTITOOL OPEL/GMECU (activation/simcard)
MULTITOOL OPEL/GMTCM (activation/simcard
BCM (activation/simcard)Ref: IO-TERMINAL-ECU
Key Line
BLUETOOTH KIT FOR KEYLINE 884 DECRYPTOR MINI + FIAT PRECODING SOFTWARE
This set includes Bluetooth battery with Bluetooth technology and software for precoding Fiat keys.
Keyline BLUETOOTH & POWER ADAPTOR is the next-generation rechargeable battery with Bluetooth technology to use 884 Decryptor Mini wirelessly. There are many advantages: perfect integration, no need for power cables and longer duration of use. Maximum flexibility.
With Bluetooth & Power Adaptor, 884 Decryptor Mini can be managed from any smartphone and tablet*, Android and iOS**, thus opening the door to cloning with Apple devices.
Its stable and long-term charge (up to 10 hours with continuous use) makes 884 Decryptor Mini even more flexible and able to meet the needs of all automotive specialists that want to offer a cloning service anywhere.
Use is immediate: enable the Bluetooth connection on your smartphone or tablet and access the Keyline Cloning Tool App; 884 Decryptor Mini and the battery will automatically be recognized by your device allowing you to immediately start cloning wirelessly. At the first power, please select the 884 Decryptor Mini with which you want to connect, in the menu "Cloning devices", then save the Bluetooth & Power Adaptor in the menu "My Products".
Bluetooth & Power Adaptor is easy and rechargeable via PC connection (Windows or Mac) or battery power. In addition, during charging, 884 Decryptor Mini can be used continuously.
Ref: BTP-884-PACK
