-
0034910228127 | europe@key-code.comOur delivery process will follow the required steps to assure the health of our workers, couriers and customers - Hours: 9:00 - 18:00hrs
Autel
9 Products
KEY AND CHIPS PROGRAMMER AUTEL XP-400
AUTEL G-BOX2 TOOL FOR MERCEDES ALL-KEY-LOST
AUTEL G-BOX tool For Mercedes All-Key-Lost
To use with both the Autel MaxiIM IM608 and Auro IM600.
The Autel G-Box is designed to be used on Mercedez-Benz vehicles with DAS3 CAN EIS/EZS in AKL. It helps to reduce the time for reading the ECU data from W204 and W207 EISs by over 85%.
Key Features:
- Mercedes Benz All Keys Lost, Faster Password Calculation
- Used with IM608 or IM508 with XP400
- Used for Faster Mercedes ECU data and EIS password calculation
- Mercedes DAS3 can EIS/EZS all keys lost
- Reduce time reading W204 ECU data & W207 EIS by over 85%
- No need to remove and reinsert the key for W221 & W164 after 2009 models
- BMW DME/DDE ISN reading and writing in boot mode
- Also compatible with Auro IM600 and Auro IM100 with XP400
AUTEL APB112 SMART KEY SIMULATOR
The APB112 smart key simulator is used to collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip. It can also simulate the vehicle key chip. Currently, it supports to simulate the 4D type chip. More key chip types will be supported with future upgrades.
Key Features:
- Smart key simulator
- Compatible with IM608, IM508, and MX808IM
- Compact but would need to be used with the XP400
- Cannot be used with the XP200
- 46, 4D data collection
- 46 smart key password calculation
- 46 chip simulation
- Toyota 4D (94/D4, 98) smart key simulation
- Toyota H (88/A8, A9, 39) smart key simulation
- Collects data from the ignition coil
- Identify ignition coil troubles
- Decode vehicle key chip data
- Simulate vehicle key chip (ex - 4D chip)
- Must be used with an Autel diagnostic tool
- Toyota/Lexus smart key all key lost
- Chip decoding (Hyundai 46)
- Includes: APB112 Smart Key Simulator, USB Cable, Quick Reference Guide
Filter By
On sale
IO TERMINAL FULL VERSION (SIEMENS, MARELLI, BOSCH, DENSO, FIAT BSI, OPEL, VOLVO, PSA, MOTO, SMART SAM)
SIEMENS (simcard)
MARELLI+MARELLI2 (activation/simcard)
BOSCH (simcard)
DENSO (simcard)
VAGDSG+EASYTRONIC (activation/simcard)
FIATBSI TOOL (simcard)
MOTORCYCLE ECU TOOL (simcard)
VOLVO TOOL (simcard)
MULTITOOL PSA BSI
MULTITOOL SMART SAM (activation/simcard)
MULTITOOL FIAT BSI2 (activation/simcard)
MULTITOOL OPELBCM (activation/simcard)
MULTITOOL OPEL/GMECU (activation/simcard)
MULTITOOL OPEL/GMTCM (activation/simcard
MULTITOOL OPEL/GMEPS (activation/simcard)
IO TERMINAL PACK BSI-BCM (FIAT, SMART, PSA, OPEL BCM)
FIATBSI TOOL (simcard)
MULTITOOL PSA BSI
MULTITOOL SMART SAM (activation/simcard)
MULTITOOL FIAT BSI2 (activation/simcard)
MULTITOOL OPELBCM (activation/simcard)
MANUAL KEY CUTTING MACHINE PANTHER SX WITH 2 JAW - CARS + HOUSE KEYS MN-2050
The Panther SX is a high quality key machine able to cut lazer and dimple keys with precision and simplicity with the added benefit of carrier locks to aid control or certain applications. In addition the clamps on the SX version can be angle through 45 degrees to enable angled cuts to be performed.
The Panther range of key cutting machines offer a high quality and robust design offering excellent precision and long term performance in even the busiest key cutting centres. The ergonomic design and broad base gives the machine a stable operation and accurate. The most striking feature of this series of machines is the versatility and accuracy built into this machine that an only be matched by machines that a far more expensive.
The ball bearing chassis offers the highest accuracy, smooth operation and support whilst being total maintenance free. The rotary level enables the spring tension to adjusted to your preferred settings. The level control offers a smooth and precise feel that gives the operator confidence in the milling process.
Thanks to the electronic control supported adjustment system the calibration can be completed in a few steps and offer an accuracy of 0.01mm. The correct setting is detailed with a go/no go warning light calibration system that assists easy and rapid calibration. Both the X and Y axis can be locked in any position by simply tightening the control level.
An LED illumination strip built into the roof of the body and directed at the cutter / jaw area offers excellent visibility of the work in all ambient light conditions.
The tracer can be lowered to the work to enable the centre to be identified and the position of the tracer pre checked without the cutting mill touching the new key. Once confirmed can be locked back in the calibrated position. Once the cutter is lowered to the work the handle can be rotated and lock to the depth of the required milling, this enables the calibrated depth to be maintained.
The highly accurate clamping system has 3 different positions to offer the greatest flexibility of key clamping. The jaws included graded position and stop positioning. The quick clamps offer rapid and accurate clamping of the work.
The cutting tools are conveniently stored in the toolbox in the front of the machine.
The Panther is CE approved and equipped with a safety shield over the cutting blade which protects the operator and deflects displaced metal.
TECHNICAL SPECIFICATIONS:
Height: 34x30x42
Engine power:150W
Noise: 64dB.
Weight: 20 Kg.
RPM: 5800 r.pm. 150W
220V
- New
IO TERMINAL PACK ECU GEARBOX (SIEMENS, MARELLI, BOSCH, DENSO, OPEL GMECU, OPEL GMTCM, VAG DSG)
SIEMENS (simcard)
MARELLI+MARELLI2 (activation/simcard)
BOSCH (simcard)
DENSO (simcard)
VAGDSG+EASYTRONIC (activation/simcard)
MULTITOOL OPEL/GMECU (activation/simcard)
MULTITOOL OPEL/GMTCM (activation/simcard
BCM (activation/simcard)
Key Line
BLUETOOTH KIT FOR KEYLINE 884 DECRYPTOR MINI + FIAT PRECODING SOFTWARE
This set includes Bluetooth battery with Bluetooth technology and software for precoding Fiat keys.
Keyline BLUETOOTH & POWER ADAPTOR is the next-generation rechargeable battery with Bluetooth technology to use 884 Decryptor Mini wirelessly. There are many advantages: perfect integration, no need for power cables and longer duration of use. Maximum flexibility.
With Bluetooth & Power Adaptor, 884 Decryptor Mini can be managed from any smartphone and tablet*, Android and iOS**, thus opening the door to cloning with Apple devices.
Its stable and long-term charge (up to 10 hours with continuous use) makes 884 Decryptor Mini even more flexible and able to meet the needs of all automotive specialists that want to offer a cloning service anywhere.
Use is immediate: enable the Bluetooth connection on your smartphone or tablet and access the Keyline Cloning Tool App; 884 Decryptor Mini and the battery will automatically be recognized by your device allowing you to immediately start cloning wirelessly. At the first power, please select the 884 Decryptor Mini with which you want to connect, in the menu "Cloning devices", then save the Bluetooth & Power Adaptor in the menu "My Products".
Bluetooth & Power Adaptor is easy and rechargeable via PC connection (Windows or Mac) or battery power. In addition, during charging, 884 Decryptor Mini can be used continuously.
