Contact us by WhatsApp
Contact us by WhatsApp

Manual key cutting machines

22 Products
Manual key cutting machines

MANUAL KEY CUTTING MACHINE KEYLINE 206 FOR CADORINE, BIT, PUMP AND P.O BOX KEYS

The movements of the carriage, due to the crossshaped table system mounted on rollers, are extremely easy and precise. The single-speed motor makes it possible to set the speed according to the material, thus obtaining high cutting precision and lengthening the life cycle of the cutter.


- Clamps:Reversible for round stem and mailbox keys

- Power supply: 230V - 50Hz

- Dimensiones: Width: 330 mm / Depth: 530 mm / Height: 390 mm

- Weight: 44 kg

- Cutter First cutter: Ø 80x1.3 mmSecond cutter: Ø 25x1.25 mm

- Cutter speed: First cutter: 500 rpm Second cutter: 1500 rpm

- Hardened tracer point

- Absorption: 400 W

- Axes: On a cross-shaped table, thanks to roller guides

- Motor: Asynchronous, one speed

Ref: BI-206

MANUAL KEY CUTTING MACHINE KEYLINE 204 FOR BIT, DOUBLE-BIT PIPE, PUMP KEYS AND KEYS WITH VERTICAL GROOVES

The 204 model is a professional key cutting machine for bit, double-bit, pipe and pump keys and for keys with vertical grooves. The movements of the carriage, due to the cross-shaped table system mounted on rolls, are extremely easy and precise. The two-speed motor makes it possible to set the speed according to the material, thus obtaining high cutting precision and lengthening the life cycle of the cutter.


- Clamps: For standard/double - bit male and female keys with self - centring tempered steel grips; for pump keys with round and square stem; for vertical cuts.

- Power supply: 230V - 50Hz

- Dimensiones: Width: 330 mm / Depth: 530 mm / Height: 390 mm

- Weight: 44 kg

- Cutter HSS Ø 80x1.5 mm

- Cutter speed: 350/700 rpm

- Hardened tracer point

- Absorption: 400 W

- Axes: On a cross-shaped table, thanks to roller guides

- Motor: Asynchronous, two speed

Ref: BI-204

MANUAL KEY CUTTING MACHINE KEYLINE 203 FOR STANDARD, DOUBLE-BIT PIPE AND PUMP KEYS

The 203 model is a key cutting machine for bit, double-bit, pipe and pump keys. The machine’s cast iron structure can eliminate any vibration, thus ensuring absence of noise and duration. The clamps, with their centring devices, make for perfect anchoring of female keys. The two-speed motor makes it possible to set the speed according to the material, thus obtaining high cutting precision and lengthening the life cycle of the cutter. Version with centering device.


- Clamps: Self-centring, made of tempered steel with countertops for female keys

- Power supply: 230V - 50Hz

- Dimensiones: Width: 380 mm / Depth: 450 mm / Height: 270 mm

- Weight: 32 kg

- Cutter HSS ø 80 mm

- Cutter speed: 350/700 rpm

- Hardened tracer point

- Absorption: 400 W

- 3 axes

- Motor: Asynchronous, two speed

Ref: BI-203

MANUAL KEY CUTTING MACHINE KEYLINE 201 FOR STANDARD, DOUBLE-BIT AND PUMP KEYS (CLAMPS NOT INCLUDED)

The 201 model is a manual key cutting machine for standard, double-bit and pump keys. This compact and silent machine is quite strong and reliable, thanks to its cast iron mechanical structure. In particular, the carriage displacement system, with lever and connecting rod, guarantees precision and simplicity of movement.


- Clamps: Self-centring, made of tempered steel

- Power supply: 110V 50Hz / 230V 50Hz

- Dimensiones: Width: 420 mm / Depth: 250 mm / Height: 290 mm

- Weight: 27 kg

- Cutter HSS ø 63 mm

- Cutter speed: 1400 rpm

- Hardened tracer point

- Absorption: 200 W

- 3 axes

- Motor: Asynchronous, single speed

Ref: BI-201

MANUAL KEY CUTTING MACHINE KEYLINE PUNTO FOR DIMPLE, LASER AND TIBBE KEYS (CLAMPS NOT INCLUDED)

The Punto machine is easy to use and precise, and is therefore the ideal tool to cut dimple and laser keys. It is reliable and ergonomic and has all the characteristics and the elements that are necessary to guarantee an excellent performance.


- Integrated LED light

- Vertical suspensions for dimple keys

- Manual locking of all mobile parts

- Possibility of use with additional clamps

- Carriages mounted on ball bushings

- Automatic check of the start and stop of the milling cutter

- Engine and wiring are protected by a relay against accidental voltage overloads

- Clamps: Fixed

- Power supply: 230V 50Hz / 110V 60Hz

- Dimensiones: Width: 220 mm / Depth: 380 mm / Height: 380 mm

- Weight: 21 kg

- Cutter HSS Ø 6 mm

- Cutter speed: 9000 rpm

- Hardened tracer point

- Lightning: Incandescent light bulb 25W

- 3 axes

- Motor: Asynchronous, single speed


ACCESSORIES SOLD SEPARETELY:


- MA: Adaptors for VAG keys

- MK45: Adaptors for Kaba 45° keys

- MK15: Adaptors for Kaba 15° keys

- MK5: Adaptors for Keso 5° keys

- MM : Adaptors for Mercedes car keys

- MTB: Adaptors for Tibbe keys

- MOMAX: Adaptors for Ford C-Max and Opel keys

Ref: PUNTO

MANUAL KEY CUTTING MACHINE KEYLINE T-REX ADVANCE FOR LASER, DIMPLE AND TUBULAR KEYS WITH TILTING CLAMPS

T-Rex Advance is the mechanical key cutting machine for laser, dimple and tubular keys whose performance is the gold standard, thanks to a perfect combination of mechanics, design and innovation. It is the ideal choice for mechanical key cutting perfection.


Versatile. The variable angle oscillating clamp allows the optimal positioning of dimple keys with flat and inclined bitting, without need of additional clamps and adapters. Moreover, it is also suitable for standard, Cisa®, VAG and tubular keys. The cutting speed, from 6,000 to 12,000 revolutions per minute, makes it possible for the operator to adapt the cutting process according to the type of cutting mill installed and the type of material used for the key.


Maximum safety. The electromechanical calibration function with visual and audible check, together with the large chip drawer and the automatic stop and accidental start prevention systems of its motor guarantee the complete safety of every process. The whole working area is lighted by special led lights that prevent any reflected glare.


Strong structure, fluid movements. Thanks to its structure with carriages moving along ball bearing guideways, vertical suspension for dimple keys and side suspension for laser keys, the T-Rex Advance offers a completely vibration free and incredibly fluid performance in the cutting of keys. The T-Rex Advance is also equipped with an led panel with buttons and arrow keys to facilitate the calibrating and cutting operations.


Ease of use. The system of ergonomic levers and knobs, the wide platform, the excellent visibility of the working area and the integrated cutting mills holder bay make T-Rex Advance exemplary in terms of ergonomics and efficiency of use.


Innovative motorized tools positioning system, patent pending. The system makes changing the tools more efficient, without manual maneuvers, so that it is possible to start cutting a dimple and laser key immediately.


- Clamps: Tilting with interchangeable tools

- Power: 230V 50Hz / 110V 60Hz / 100V 50-60Hz

- Dimensions: Width: 320 mm / Depth: 420 mm (with chip tray 475 mm) / Height: 490 mm

- Weight: 25 kg

- Cutter: HSS ø 6 mm (optionals in Widia)

- Cutter speed: From 6000 rpm to 12000 rpm

- LED lightning

- 3 axes with sliding guides

- Motor Asynchronous; with 0.18kW variable speed

- Battery absorption: 300W

Ref: TREX-ADVANCE

MANUAL KEY CUTTING MACHINE KEYLINE ARCADIA BI503 FOR TUBULAR KEYS (CLAMPS KT0 INCLUDED)

Arcadia is Keyline's key cutting machine for tubular keys.


It can be used to cut tubular keys of several brands, thanks to the wide, ever expanding range of adapters available.


It was manufactured pursuant to the most recent safety standards. The electronic control starts the cutter only when it is close to the key; the high-security protection barrier and the LED light enhancing visibility in the work area make it possible to use this machine reliably, safely and pleasantly. Thanks to the perfect engineering of its mechanism, it is also possible to use existing key cutting adapters, which, in turns, leads to the optimisation of the investment.


- Clamps: More clamps for specific markets are available on demand

- Power supply: 110V 50Hz / 230V 50Hz

- Dimensiones: Ancho: Width: 210 mm / Height: 210 mm / Depth: 400 mm

- Weight: 12,5 kg

- Cutter HSS Ø 5,95 mm

- Cutter speed: 2800 rpm

- Hardened tracer point

- Lightning: LED - lighted cutting bay

- 2 axes

- Motor: Asynchronous; 0,15KW


ACCESSORIES SOLD SEPARETELY (comptabiles with SILCA models):


- KT0: For Chicago, Meroni, P.C. Cortellezzi keys

- KT2: For Progres, Fontaine and Corni keys

- KT3: For Progres, Fontaine and Corni keys

- KT4: ForVigie Picard keys

- KT5 : For Laperche keys

- KT6: For JPM keys

- KT7 : For FTH and DAD-Decayeux keys

- KT8 : For Pollux keys

- KT9 : For Pollux keys

- KT13: For Cavith keys

Ref: ARCADIA-BI503

MANUAL KEY CUTTING MACHINE DOLPHIN XP007 WITH BATTERY

Manual key cutting machine Dolphin XP007 with integrated battery.


All aluminum body structure, Manufactured by Germany-made DMG CNC machine

With micro-adjust probe, Spring preloading type fine-tuning structure, ensure cutting accuracy; With this structure it can position the original key in advance, in case the spring vibrating caused cutting error, good for accuracy

Standard equipped multifunction clamp, support Sided, Track, Dimple and tubular keys

120W DC brushless motor, designed 2 switches for adjustment speed, high efficiency cutting, support multiple materials of the key blank.

Optimized lithium battery of well-known brand, stable and reliable, support cutting under no power conditions

One year warranty, free technical support, online service to provide remote control support


Main motor speed:13000 rpm

Power Parameter: 12-18V

Machine Dimension:282x246.5x355mm

Package Dimension: 365x325x350mm

Ref: CONDOR-XP007

MANUAL KEY CUTTING MACHINE KEYLINE T-REX BI313 FOR LASER, DIMPLE AND TUBULAR KEYS

T-Rex is a mechanical key cutting machine for laser, dimple and tubular keys. It is ideal for specialists needing a professional and versatile solution to integrate their key cutting capabilities.


Versatile. The variable angle oscillating clamp allows the optimal positioning of dimple keys with flat and inclined bitting, without need of additional clamps and adapters. Moreover, it is also suitable for standard, Cisa®, VAG and tubular keys.


Maximum safety. The electromechanical calibration function with visual and audible checking, together with the large chip drawer and the automatic stop and accidental start prevention systems of the motor guarantees the complete safety of every process. The whole working area is lighted by special led lights that prevent any reflected glare.


Ease of use. The system of ergonomic levers and knobs, the wide platform, the excellent visibility of the working area and the integrated cutting mills holder bay make T-Rex exemplary in terms of ergonomics and efficiency of use.

Ref: TREX-BI310

MANUAL KEY CUTTING MACHINE KEYLINE FALCON BI502 FOR TIBBE, ABUS AND ABLOY KEYS (1 CLAMP OF YOUR CHOICE INCLUDED)

Falcon is a code key cutting machine for special Tibbe-type keys for Ford and Jaguar vehicles, and for high security keys such as Abus and Abloy. It includes one of these clamps for free. Addtionsl clamps must be purchased separately.


This machine can cut a key on both sides without having to remove the key from the clamp, thanks to an integrated adaptor that makes it possible to rotate the key by 360°.


The machine complies with all the newest safety standards: it has a safety feature that engages when the cutter is started and moves the carriage forwards, an independent switch to move the brush and a strong Plexiglas barrier.


Falcon is the only mechanical key cutting machine for special keys that combines ease of use and strength, thanks to the design of its base and to the reliable accessories, that guarantee the perfect stability of the key during the cutting phase, thus guaranteeing a perfect execution. Moreover, the innovative Easy Fit system makes it possible for the operator to secure the key without special tools.


Falcon integrates and develops the special keys sector, introducing practical new features, such as the exchangeable clamps and an innovative design.


The engine and wires are protected by a fuse against accidental overloads, making this machine more reliable and more efficient.


Ref: FALCON-BI502

MANUAL KEY CUTTING MACHINE KEYLINE T-REX BI313 FOR LASER, DIMPLE AND TUBULAR KEYS WITH TILTING CLAMPS

T-Rex Plus is a mechanical key cutting machine for laser, dimple and tubular keys. It is ideal for specialists needing a professional and versatile solution to integrate their key cutting capabilities.


Versatile. The variable angle oscillating clamp allows the optimal positioning of dimple keys with flat and inclined bitting, without need of additional clamps and adapters. Moreover, it is also suitable for standard, Cisa®, VAG and tubular keys.


Maximum safety. The electromechanical calibration function with visual and audible checking, together with the large chip drawer and the automatic stop and accidental start prevention systems of the motor guarantees the complete safety of every process. The whole working area is lighted by special led lights that prevent any reflected glare.


Strong structure, fluid movements. Thanks to its structure with carriages moving along ball bearing guideways, vertical suspension for dimple keys and side suspension for laser keys, the T-Rex offers a completely vibration free and incredibly fluid performance in the cutting of keys.


Ease of use. The system of ergonomic levers and knobs, the wide platform, the excellent visibility of the working area and the integrated cutting mills holder bay make T-Rex exemplary in terms of ergonomics and efficiency of use.


- Clamps: Tilting with interchangeable tools

- Power: 230V 50Hz / 110V 60Hz / 100V 50-60Hz

- Dimensions: Width: 320 mm / Depth: 420 mm (with chip tray 475 mm) / Height: 490 mm

- Weight: 24 kg

- Cutter: HSS ø 6 mm

- Cutter speed: 6000 rpm

- LED lightning

- 3 axes with sliding guides

- Motor

- Battery absorption: 200W

Ref: TREX-PLUS-BI313

MANUAL KEY CUTTING MACHINE KEYLINE EASY XDU0001A (CLAMPS WITH 2 and 4 FACES) FOR EDGE, CRUCIFORM AND SIMPLEX KEYS

Key cutting machine for cylinder, car and cruciform keys, with two and four-sided reversible clamps, that provides an optimal grip. This system guarantees a safe start of the machine, thanks to the forward movement of the carriage, and is equipped with an independent switch for the brush and with a tempered tracer with depth adjustment. The plastic protection screen and the cabling and engines protected from accidental overloads by a relay complete the safety equipment of this machine.


Since January 2017, Easy has a new design, more functional and modern, that simplifies and improves the user experience during all the cutting phases. Thanks to new and high-techlogical components, Easy becomes even more efficient, safe and adaptable to any workstation.


The Easy Quattro version is equipped with four-sided clamps to grip all types of keys providing more comfort and ease of use.


- Clamps: 4 clamps of 2 and 4 faces

- Power supply: 230V 50Hz / 110V 60Hz

- Dimensions: Width: 370 mm / Depth: 370 mm / Height: 240 mm

- Weight: 19 kg

- Cutter: HSS 80x5x16 mm

- Cutter speed: 700 rpm

- Tracer point: Hardened

- 2 axes

- Motor asynchronous, one speed, 0.25 Kw

- Brush: Tynex

Ref: EASY-XDU0001A4

MANUAL KEY CUTTING MACHINE KEYLINE EASY XDU0001A (CLAMP WITH 2 FACES) FOR EDGE, CRUCIFORM AND SIMPLEX KEYS

Key cutting machine for cylinder, car and cruciform keys, with two and four-sided reversible clamps, that provides an optimal grip. This system guarantees a safe start of the machine, thanks to the forward movement of the carriage, and is equipped with an independent switch for the brush and with a tempered tracer with depth adjustment. The plastic protection screen and the cabling and engines protected from accidental overloads by a relay complete the safety equipment of this machine.


Since January 2017, Easy has a new design, more functional and modern, that simplifies and improves the user experience during all the cutting phases. Thanks to new and high-techlogical components, Easy becomes even more efficient, safe and adaptable to any workstation.


- Clamps: 2 clamps of 2 faces

- Power supply: 230V 50Hz / 110V 60Hz

- Dimensions: Width: 370 mm / Depth: 370 mm / Height: 240 mm

- Weight: 19 kg

- Cutter: HSS 80x5x16 mm

- Cutter speed: 700 rpm

- Tracer point: Hardened

- 2 axes

- Motor asynchronous, one speed, 0.25 Kw

- Brush: Tynex

Ref: EASY-XDU0001A

MANUAL KEY CUTTING MACHINE KEYLINE CARAB BI106-C WITH 4 CARBON CLAMPS FOR EDGE, CRUCIFORM AND SIMPLEX KEYS (SPECIAL FRO FRENCH M

Ninja Dark is a high-precision mechanical duplicating machine to cut by copy single and double sided edge-cut keys.


The speed of the duplicating function is unrivaled, with single step key cutting, maximum precision and reliability. Simply insert the keys and press the quick-copy button, Ninja Dark will take care of the rest. Ninja Dark offers extraordinary operational ease made possible with a LED lit work area, gauge control and micrometric and scaled system of tracer point calibration for depth adjustment.


The compact and sleek design optimizes the functionality of every work environment in both large and small areas.


Ninja Dark allows the progression from basic key copying to advanced key cutting functions thanks to the easy integration of a dedicated digital touch screen console which can be purchased separately. Virtually infinite expansion options transform Ninja Dark into the most advanced electronic key cutting machine for edge-cut keys.


- Clamps: 4 faces (more clamps are available for specific markets)

- Power supply: 90-130V 50-60Hz / 220-240v 50-60hZ

- Dimensions: Width: 340 mm / Depth: 415 mm / Height: 300 mm

- Weight: 20 kg

- Cutter: In Widia Ø 63 mm

- Cutter speed: 2000 rpm

- Tracer point: Hardened

- LED lightning.

- 2 stepper motor-operated axes

- Motor: Asynchronous; 0.18KW

- External connections: 1 RS232 serial ports

- Battery absorption: 250W (15W in stand-by)

- Gauge: Automatic gauge unlock through the movement of the axes

- Electronic equipment: High resolution axes control

Ref: NINJA-DARK

MANUAL KEY CUTTING MACHINE KEYLINE CARAB BI106-C WITH 4 CARBON CLAMPS FOR EDGE, CRUCIFORM AND SIMPLEX KEYS (SPECIAL FRO FRENCH M

Professional key cutting machine for flat keys for cylinder and car locks, and cruciform keys.


The selection of the clamp side is especially simple, quick and convenient: just press the lifting lever to rotate the mechanism until the most appropriate face is displayed. The specific button to start the supplied brush is a guarantee of safety. Moreover, the protection casing hermetic layout facilitates brushing and prevents swarfs from coming into contact with the transmission mechanisms.


Safety, convenience, ease of use, flexibility and rapidity of cutting are the main advantages offered to the user, thanks to Carat’s technological novelties.


- Clamps: 4 carbon clamps of 2/4 faces (more versions for specific markets are available)

- Power supply: 230V 50Hz / 110V 60Hz / 100V 50-60 Hz

- Dimensions: Width: 400 mm / Depth: 460 mm / Height: 270 mm (without lamp); 440 mm (with lamp)

- Weight: 25 kg

- Cutter: HSS ø 80 mm (Carat Duo, Carat Quattro) - En Widia ø 80 mm (Carat Quattro W)

- Cutter speed: 640 rpm (Carat Duo, Carat Quattro) - 1400 rpm (Carat Quattro W) )

- Tracer point: Hardened with regulation nuts

- Neon lightning.

- 2 axes

- Motor asynchronous, one speed, 0.25 Kw

- Brush: Tynex

Ref: CARAT-BI106CBD

MANUAL KEY CUTTING MACHINE KEYLINE CARAB BI106-C WITH 4 CARBON CLAMPS FOR EDGE, CRUCIFORM AND SIMPLEX KEYS

Professional key cutting machine for flat keys for cylinder and car locks, and cruciform keys.


The selection of the clamp side is especially simple, quick and convenient: just press the lifting lever to rotate the mechanism until the most appropriate face is displayed. The specific button to start the supplied brush is a guarantee of safety. Moreover, the protection casing hermetic layout facilitates brushing and prevents swarfs from coming into contact with the transmission mechanisms.


Safety, convenience, ease of use, flexibility and rapidity of cutting are the main advantages offered to the user, thanks to Carat’s technological novelties.


- Clamps: 4 carbon clamps of 2/4 faces (more versions for specific markets are available)

- Power supply: 230V 50Hz / 110V 60Hz / 100V 50-60 Hz

- Dimensions: Width: 400 mm / Depth: 460 mm / Height: 270 mm (without lamp); 440 mm (with lamp)

- Weight: 25 kg

- Cutter: HSS ø 80 mm (Carat Duo, Carat Quattro) - En Widia ø 80 mm (Carat Quattro W)

- Cutter speed: 640 rpm (Carat Duo, Carat Quattro) - 1400 rpm (Carat Quattro W) )

- Tracer point: Hardened with regulation nuts

- Neon lightning.

- 2 axes

- Motor asynchronous, one speed, 0.25 Kw

- Brush: Tynex

Ref: CARAT-BI106C4W

MANUAL KEY CUTTING MACHINE KEYLINE CARAB BI106-C WITH 4 CLAMPS FOR EDGE, CRUCIFORM AND SIMPLEX KEYS

Professional key cutting machine for flat keys for cylinder and car locks, and cruciform keys.


The selection of the clamp side is especially simple, quick and convenient: just press the lifting lever to rotate the mechanism until the most appropriate face is displayed. The specific button to start the supplied brush is a guarantee of safety. Moreover, the protection casing hermetic layout facilitates brushing and prevents swarfs from coming into contact with the transmission mechanisms.


Safety, convenience, ease of use, flexibility and rapidity of cutting are the main advantages offered to the user, thanks to Carat’s technological novelties.


- Clamps: 4 clamps of 2/4 faces (more versions for specific markets are available)

- Power supply: 230V 50Hz / 110V 60Hz / 100V 50-60 Hz

- Dimensions: Width: 400 mm / Depth: 460 mm / Height: 270 mm (without lamp); 440 mm (with lamp)

- Weight: 25 kg

- Cutter: HSS ø 80 mm (Carat Duo, Carat Quattro) - En Widia ø 80 mm (Carat Quattro W)

- Cutter speed: 640 rpm (Carat Duo, Carat Quattro) - 1400 rpm (Carat Quattro W) )

- Tracer point: Hardened with regulation nuts

- Neon lightning.

- 2 axes

- Motor asynchronous, one speed, 0.25 Kw

- Brush: Tynex

Ref: CARAT-BI106C4

MANUAL KEY CUTTING MACHINE KEYLINE CARAB BI106-C WITH 2 CLAMPS FOR EDGE, CRUCIFORM AND SIMPLEX KEYS

Professional key cutting machine for flat keys for cylinder and car locks, and cruciform keys.


The selection of the clamp side is especially simple, quick and convenient: just press the lifting lever to rotate the mechanism until the most appropriate face is displayed. The specific button to start the supplied brush is a guarantee of safety. Moreover, the protection casing hermetic layout facilitates brushing and prevents swarfs from coming into contact with the transmission mechanisms.


Safety, convenience, ease of use, flexibility and rapidity of cutting are the main advantages offered to the user, thanks to Carat’s technological novelties.


- Clamps: 2 clamps of 2/4 faces (more versions for specific markets are available)

- Power supply: 230V 50Hz / 110V 60Hz / 100V 50-60 Hz

- Dimensions: Width: 400 mm / Depth: 460 mm / Height: 270 mm (without lamp); 440 mm (with lamp)

- Weight: 25 kg

- Cutter: HSS ø 80 mm (Carat Duo, Carat Quattro) - En Widia ø 80 mm (Carat Quattro W)

- Cutter speed: 640 rpm (Carat Duo, Carat Quattro) - 1400 rpm (Carat Quattro W) )

- Tracer point: Hardened with regulation nuts

- Neon lightning.

- 2 axes

- Motor asynchronous, one speed, 0.25 Kw

- Brush: Tynex

Ref: CARAT-BI106C

MANUAL KEY CUTTING CONDOR XC-009 WITH BATTERY

Manual key cutting machine Condor XC-009.


It has an ergonomic design and it s built in high quality materials

Excellent device for VAN or workshop, can cut up to 100 keys with 1 battery power charging.

2 years warranty included.

Ref: CONDOR-XC009

MANUAL KEY CUTTING MACHINE CONDOR XC-002

Manual key cutting machine Condor XC-002.


It has an ergonomic design and it s built in aluminium.

It supports all kind of keys (laser, tibbe, etc) thanks to its replaceable clamps.

Semi-automatic calibration

2 year warranty

If you have a Mercedes programming device VVDI-BENZ, you can associate your Condor XC-002 to your programmer and get a free daily token.

Ref: CONDOR-XC002