 0034910228127 | europe@key-code.com |
Our delivery process will follow the required steps to assure the health of our workers, couriers and customers - Hours: 9:00 - 18:00hrs |
Turbo Decoder HU66 Gen1 allows you to oper door and ignition locks of VAG vehicles (Volkswagen, Audi, Seat, Skoda and Porsche) with HU66 keys manufactured up to 2006
Once the lock has been successfully open, it also saves key's code for creating a new copy using a cutting machine
It includes a case for easy carriage and maximum protection and a configuration tool
The automatic lock pick Turbo Decoder HU100 allows to open door and ignition locks in Opel, Chevrolet and other vehicles with HU100 keys
Once the lock has been successfully opened, this tool also saves the key code so you can reproduce the key using an automatic key cutting machine.
Turbo Decoder includes a case for easy transport and a configuration tool
It can be used in the following models:
- Agila
- Astra 2004 onwards
- Combo van 2004 onwards
- Corsa 2002 onwards
- Insignia
- Meriva 2004 onwards
- Tigra 2004 onwards
- Vectra up to 2006
- Zafira from 2004
- Barina from 2004
- Combo from 2004
- Cruze from 2007
- Most vehicles manufactured from 2006
BUICK
- Allure (from 2009)
- Lacrosse (from 2009)
CADILLAC
-Several models since 2007
GENERAL MOTORS
- Terrain (from 2010)
CHEVROLET
- Camero (2009-)
- Equinox (2010-)
- Cruze (2007-)
Specially selected Turbodecoder lubricant to keep your tool always in good operative conditions.
Your tool is made from very small parts and to keep it in order will be good from time to time to take care of it.
We consider to clean once in a month with compressed air and to lubricate the turbodecoder key blade with our special selected lubricant.
1 container is sufficient for year of care.
Turbo Decoder HU92 allows you to oper door and ignition locks of BMW vehicles with HU92 keys (2 tracks)
Once the lock has been successfully open, it also saves key's code for creating a new copy using a cutting machine
It includes a case for easy carriage and maximum protection and a configuration tool
SIEMENS (simcard)
MARELLI+MARELLI2 (activation/simcard)
BOSCH (simcard)
DENSO (simcard)
VAGDSG+EASYTRONIC (activation/simcard)
FIATBSI TOOL (simcard)
MOTORCYCLE ECU TOOL (simcard)
VOLVO TOOL (simcard)
MULTITOOL PSA BSI
MULTITOOL SMART SAM (activation/simcard)
MULTITOOL FIAT BSI2 (activation/simcard)
MULTITOOL OPELBCM (activation/simcard)
MULTITOOL OPEL/GMECU (activation/simcard)
MULTITOOL OPEL/GMTCM (activation/simcard
MULTITOOL OPEL/GMEPS (activation/simcard)
ACDP Basic module + CAS module + FEM module + ISN module + 080/160 DOWT/Q module + Fujitsu CPU MB91F Module + MQB/MMC Module + BMW Key refresh module + FRM Footwell module + Jaguar/Land Rover KVM Module + Posche BCM Module + Gearbox module + VOLVO module
FIATBSI TOOL (simcard)
MULTITOOL PSA BSI
MULTITOOL SMART SAM (activation/simcard)
MULTITOOL FIAT BSI2 (activation/simcard)
MULTITOOL OPELBCM (activation/simcard)
The Panther SX is a high quality key machine able to cut lazer and dimple keys with precision and simplicity with the added benefit of carrier locks to aid control or certain applications. In addition the clamps on the SX version can be angle through 45 degrees to enable angled cuts to be performed.
The Panther range of key cutting machines offer a high quality and robust design offering excellent precision and long term performance in even the busiest key cutting centres. The ergonomic design and broad base gives the machine a stable operation and accurate. The most striking feature of this series of machines is the versatility and accuracy built into this machine that an only be matched by machines that a far more expensive.
The ball bearing chassis offers the highest accuracy, smooth operation and support whilst being total maintenance free. The rotary level enables the spring tension to adjusted to your preferred settings. The level control offers a smooth and precise feel that gives the operator confidence in the milling process.
Thanks to the electronic control supported adjustment system the calibration can be completed in a few steps and offer an accuracy of 0.01mm. The correct setting is detailed with a go/no go warning light calibration system that assists easy and rapid calibration. Both the X and Y axis can be locked in any position by simply tightening the control level.
An LED illumination strip built into the roof of the body and directed at the cutter / jaw area offers excellent visibility of the work in all ambient light conditions.
The tracer can be lowered to the work to enable the centre to be identified and the position of the tracer pre checked without the cutting mill touching the new key. Once confirmed can be locked back in the calibrated position. Once the cutter is lowered to the work the handle can be rotated and lock to the depth of the required milling, this enables the calibrated depth to be maintained.
The highly accurate clamping system has 3 different positions to offer the greatest flexibility of key clamping. The jaws included graded position and stop positioning. The quick clamps offer rapid and accurate clamping of the work.
The cutting tools are conveniently stored in the toolbox in the front of the machine.
The Panther is CE approved and equipped with a safety shield over the cutting blade which protects the operator and deflects displaced metal.
TECHNICAL SPECIFICATIONS:
Height: 34x30x42
Engine power:150W
Noise: 64dB.
Weight: 20 Kg.
RPM: 5800 r.pm. 150W
220V
SIEMENS (simcard)
MARELLI+MARELLI2 (activation/simcard)
BOSCH (simcard)
DENSO (simcard)
VAGDSG+EASYTRONIC (activation/simcard)
MULTITOOL OPEL/GMECU (activation/simcard)
MULTITOOL OPEL/GMTCM (activation/simcard
BCM (activation/simcard)
With MultGiga you will be able to connect, energize and communicate on bench with reading and programming modules of most of diagnostic devices and immobilizer readers. It also communicates with dashboards and ECU'S.
What is MultGiga?
- Communication interface by OBD
- It doesn't replace clipping or soldering procedures
- It doesn't replace the transponder module
- Supports several car makers.
It has an OBD plug, so it can be connected to a diagnostic equipment, allowing user to read passwords, unit adaptation, resets, generation of keys and others.
It is a very versatile device, because most of procedures can be done directly on bench, so the presence of the vehicles is not needeed. This will help you to expand your business because you will be able to work on vehicles from different cities.
Key Line
This set includes Bluetooth battery with Bluetooth technology and software for precoding Fiat keys.
Keyline BLUETOOTH & POWER ADAPTOR is the next-generation rechargeable battery with Bluetooth technology to use 884 Decryptor Mini wirelessly. There are many advantages: perfect integration, no need for power cables and longer duration of use. Maximum flexibility.
With Bluetooth & Power Adaptor, 884 Decryptor Mini can be managed from any smartphone and tablet*, Android and iOS**, thus opening the door to cloning with Apple devices.
Its stable and long-term charge (up to 10 hours with continuous use) makes 884 Decryptor Mini even more flexible and able to meet the needs of all automotive specialists that want to offer a cloning service anywhere.
Use is immediate: enable the Bluetooth connection on your smartphone or tablet and access the Keyline Cloning Tool App; 884 Decryptor Mini and the battery will automatically be recognized by your device allowing you to immediately start cloning wirelessly. At the first power, please select the 884 Decryptor Mini with which you want to connect, in the menu "Cloning devices", then save the Bluetooth & Power Adaptor in the menu "My Products".
Bluetooth & Power Adaptor is easy and rechargeable via PC connection (Windows or Mac) or battery power. In addition, during charging, 884 Decryptor Mini can be used continuously.
Proximity remote key with 3 buttons used in Toyota Land Cruiser Prado manufactured after 2009.
VIN number is required for ordering this product.
Toyota part number: 8990460540, 8990460542
Transponder: ID6B 6F
Emergency blade not included
433 mhz
