OBDStar Hardware14 Products
F101 is appropriated for remote, programming Auto Keys and smart key of TOYOTA vehicles.
It's easy to carry, and its appearance is designed elaborately.
- Multi-language environment can be applied in different countries and regions.
- The main unit system adopts ARM high speed chip to keep it running fast, stable and anti-jamming.
- Upgrade via TF card at any time.
1. Support 4D (67,68) chip immobilizer reset (All keys lost).
2. Support 72 chip (WITH G,EUROPE) immobilizer reset (All keys lost).American TOYOTA with G key Reset will upgrade soon!
3. Support smart key reset before 2009 (All keys lost).
4. Add/erase Keys for all of TOYOTA cars.
5. Add/erase smart keys for all of TOYOTA cars.
6. Add/erase remotes for most of TOYOTA cars.
7. No need to connect with computer, plug and play, automatic transfer.
8. No need to buy tokens.
9. One Key Upgrade
10. Have good man-machine interaction.
English, simplified Chinese, traditional Chinese
VAG-PRO is a kind of professional handheld device mainly for VW, AUDI, SKODA, SEAT in programming and setting. The detail function is as follows:
1. Mileage adjustment;
2. Read Security code;
3. Maintenance Reset ;
4. EPB(Electronic Park Brake);
5. TPS(Throttle Position Matching);
6. Program Keys;
7. Program Remote;
8. Replace Storage Battery;
9. Repair Airbags;
10. Steering Angle Learning;
1. Support basic diagnosis for all series car models;
2. Support mileage adjustment for Audi A3, A4( RB4/RB5), A4L, A5, A6, A6L, A8L, Q5, Q7, S5, R8, TT;
3. Support mileage adjustment for VW Bora, Beetle, Caddy, CC, EOS, Lavida, Magotan, Golf, GTI, Jetta, Passat, Phaeton, POLO, Scirocco, Sharan, T5, Tiguan, Touareg, Touran, Tansporter etc.
4. Support mileage adjustment for Fabia, Octavia, Superb, Altea, Ibiza, Leon, etc.
5. Support read secutiry code for the 3RD generation immobiliser Bora, Golf, Passat, Lingyu, Jetta, Polo, Sharan etc.
6. Support read security code and Immobiliser for the 3.5 generation immobiliser Lavida, Sagitar, Caddy, Touran, Octavia etc.
7. Support read security code for the 3.5 generation Immobiliser Audi 03-05 A4(RB4), 06-07 A4(RB8), (At present, most device cannot support read security code, when replace used instrument, it is needed.)
8. One click Maintenance reset, no need any channel number, support small and big maintenance auto reset for the latest models till 2014 A8L, A7, A6L, A5, A4L, A3, A1, Q5, Q7,Q3, TT, Magotan, CC, Lavida, Satigar, Passat, Superb, Fabia, Tiguan, Tiguan, Scirocco, EOS, Touareg, Gran Lavida etc.
9. Support replace brake pads for the cars with EPB, support brake pad thickness input directly, intelligent operation, no need channel number;
10. Support throttle position matching, auto-identification vehicles, intelligent operation;
11. Before the 4th generation immobiliser, support intelligently program keys , no need channel number;
12. Before the 4th generation immobiliser, support intelligently program remote, no need channel number;
13. Replace storage battery for the vehicles with Automatic start-stop device;
14. Repair airbags collision data for old VW5, VW51 etc.;
15. Steering angle learning for G85;
16. VW, AUDI the 4/5th generation adapter is being developed, support optional.
1. The main unit adopts ARM high-speed chip, the speed is faster;
2. Support multi-language condition, it can be used in different countries.
3. Integrated structure design, anti-throw, anti-shake, durable and long lasting;
4. Industrialization design, it can work stably under the bad environment, such as hot and cold temperature etc ;
5. Large capacity TF card, on-line update;
6. Offer 1 years free update for the opened software.
H108 supports key programming, all key lost, odomether adjustmen and PIN code reading on Peugeot, Citroën and DS vehicles with CAN systems.
H108 is easy to use. It is small and light and it can be carried everywhere.
- PIN code reading on all key lost situations.
- Reads Eeprom and Flash.
OBDSTAR H100 newly released auto key programmer for Ford, Mazda, Land Rover and Jaguar update version of Obdstar F100, covers a wide range of vehicles, including models up to the 2016/2017 year, even to the 2018 year for some car models.
H108 is easy to use. It is small and light and it can be carried everywhere.
OBDSTAR H105 is designed to program auto key and calibrate cluster(odometer adjustment) via OBD for Hyundai and Kia vehicles. It features in programming 46 chip ordinary key and 46/47/8A chip smart key, as well as reading pin code for all series models.
H105 is easy to use. It is small and light and it can be carried everywhere.
OBDSTAR X300 DP Plus is a convenient device, combining Android system, immobilizer, diagnose and special functions.
- No VCI box, all in one
- Can be charged by OBD
- Back holder on the device
- Includes 4 Toyota emulators, which can be used with P001
- Includes P001 programmer
- Includes wires and accessories for new functions like ECU cloning and switch activation
- Software for ECU cloning and switch activation
- Upgrade notices, ECU diagrams and car lists.
- Free updateds during free update periods
1. Support wifi android system
2. One key upgrade realizes with one click
3. Program keys, proximity keys, smart key, flip keys;
X300 DP Highlights:
•Android system is equipped with clear and user-friendly interface.
•Diagnostic function strengthens professionalism in auto key programming.
•Large amount of videos help users to operate it easily.
•Maintenance database offers more powerful data.
•Remote guide achieves zero distance between users and technicians.
•Report center helps mutual improvement of terminal experience and technology.
•One key upgrade realizes with one click.
•Industrial design ensures that the tool works stably under tough environment, such as high or low temperatures.
•Multi-language environment can be applied in different countries and areas.
Can support toyota G Chip with all key lost
Support Key programming no need pin code
1. Vehicle coverage
BAIC, BENZ, BESTURN, BMW, BRILLIANE, BYD, CHANGAN, CHANGHE, CHERY, CHRYSLER(CHRYSLER/DODGE/JEEP), DFFENGSHEN, DFPV, FAW, FIAT, FORD/LINCOLN, GEELY/HUAPU/SQYL, GM(BUICK/CADILLAC/CHEVROLET/GMC/HUMMER), GREATWALL, HAFEI, HAWTAI, HIMIKO, HNMAZDA, HONDA/ACURA, HONGQI, HYUNDAI, ISUZU, JAC, JAGUAR, KIA, LANDROVER, LIEBAO, LIFAN, LUFENG, LUXGEN, MASERATI, MAZDA, MITSUBISHI, NISSAN/INFINITI, OPEL, PEUGEOT/CITROEN, PORSCHE, PROTON, QQROS, RENAULT, ROEWE/MG, SGMW, SMART, SSANGYONG, SUBARU, SUZUKI, TJFAW, TOYOTA/LEXUS, VW/AUDI/SKODA/SEAT, YOUNGLOTUS, ZZMAZDA, ZZNISSAN, ZOTYE;
There would be some difference to software in different countries. If need more specific information, pls feel free to contact us or our distributors in your area.
2. Software update
One key upgrade ; Free update for one year
English, simplified Chinese, traditional Chinese, language customization.
Read and clear fault codes;
Clear key memory;
Program keys, proximity keys, smart key, flip keys;
Program after-market and OEM keys;
Display live data;
Read keys from immobilizer memory
New ECU programming;
New mechanical key number programming;
Vehicle identification key programming;
Reset ECU& Reset immobilizer;
New remote controller programming;
Immo PINCODE reader;
Mileage adjustment via OBD;
With full and strong database for the most important vehicle makes;
One key upgrade via wifi
Built-in repair video
EEPROM chip read and immobilizer initialization;
EPB(Electric park brake);
Steering angle reset
CVT learning/Value reset
X300 DP tablet computer
5V DC adapter power
12V DV adapter power
OBD15P main cable
On the basis of original adapters features, P001, integrated with the EEPROM adapter, RFID adapter and Key Renew Adapter, is a multifunctional programmer.
It brings a brand new experience, which not only allows auto techinician to reduce more cumbersome procedures, but also can be compatible with simulated smart keys to realize Toyota all key lost.
All 2018 FCA (FIAT, CRHSYLER, ALFA ROMEO) vehicles are equipped with SGW Safety Gateway Modules to prevent access to the vehicle from the OBD2 port via a non-original diagnostic scanner. The purpose of this module is to prevent attacks on the vehicle network via the CAN bus.
HOW TO USE FCA 12+8?
Locate and plug the 12 PIN and 18 PIN connectors of the SGW module, then connect the FCA 12+8 directly to the 12 PIN and 8 PIN (two connectors connected to the SGW) connectors on the car. At this point, normal communication with the car can be achieved.
Tango programmer is a new generation of transponder programmer which is developed to read, write and generate the latest transponders used in the latest vehicle immobilizer technologies.
After generating a new transponder with TANGO Programmer, you will not need any additional diagnostic equipment to program the generated transponder to the car! It will start the car directly.
It includes the following software:
Opel key maker
Mercedes cars key maker
Mercedes trucks key maker
Toyota key maker
Honda motorcycles (HITAG2) key maker
Chrysler key maker
Renault cars key maker
Renault trucks key maker
Rover key maker
Iveco trucks key maker
Ford cars key maker
Chevrolet (GMC) key maker
Dacia key maker
Citroen key maker
Fiat key maker
Isuzu key maker
Peugeot key maker
Ducati key maker
Cadillac key maker
Gilera & Piaggio (ST10..MCU) key maker key maker
Alfa Romeo key maker
Lancia key maker
Dodge key maker
Daihatsu key maker
Suzuki key maker
Ferrari key maker
Jeep key maker
Nissan key maker
Volvo key maker
Component Security Viewer
Synchro maker Volvo
Dump editor BCM2
Reset of Toyota/Lexus/Subaru Smart Keys 40,80,128 bit
Toyota Image Generator G-KeysPage1 36,56,96,37,57
Toyota+: OBD Reset European cars based on G-immoboxes
Toyota Dump Editor – Synchro Engine ECU, Smartkey ECU, ID Code Box, Steering Lock ECU
Daihatsu Image Generator G-Keys
BMW motorcyles (DST80) key maker
Toyota Image Generator H-Keys: Page1 39, 59, 5A, 99
BCM2 key maker (Audi A4/A5/Q5)
This software upgrades your VVDI2 from basic to full software.
Included following features: VAG, BMW OBD, BMW CAS4+, Immo 5th
FEM, MQB and ID48 CLONING ARE NOT INCLUDED
Includes the following software:
- Rover Key Maker
- Mercedes cars key maker
- Opel key maker
- Toyota key maker
- Renault cars key maker
- Ford cars key maker
- Dacia key maker
- Citroën key maker
- Peugeot key maker
- Alfa Romeo key maker
- Lancia key maker
- Nissan key maker
- Vovo key maker
- BCM key maker (Audi A4, A5, Q5)
Includes the following software:
- Toyota key maker
- SLK02 maker
- SLK03 maker
- SLK04 maker
- SLK05 maker
- Toyota Image Generator G keys
- Toyota Image Generator H keys
- Toyota OBD Reset
- Toyota Dump editor
Super VAG Key is the new key and remotes programming software for the VAG Group vehicles.
Super VAG Key allows you to program keys and remotes of vehicles Volkswagen, Audi, Skoda and Seat manufactured between 1998 and 2014
ATTENTION!!! NEW SUPER VAG KEY UPDATE AVAILABLE
It supports Volkswagen, Seat and Skoda vehicles from 2009 to 2014 withr NEC processor and board VDO or MM5/7: Golf, Jetta, Passat, Gol, Spacefox, Saveiro, Octavia, Rapid, Yeti, Up, Citigo, Mii, Leon...
This program does not use any extra hardware for functioning. You just need to install Super VAG Key in your computer. The info obtained will be transferred to a transponder using a cloning or programming device, such us Touchclone.
Super VAG's interface is simple and user friendly. Here are some operations that can be performed with Super VAG Key:
- Pre-programming transponder chips
- Key programming
- Reading of immobiliser status
- Vehicle scanning tool
- It reads and deletes error codes
The following features will be included soon:
- Immobiliser recognition
- New interface
- Increase of dashboard database
- Heuristic analysis(PIN code reading in unknown dasboards)
Super VAG has a technical support department and you will get free updates with your anual subscription. You will receive one year of free updates when you buy Super VAG Key for the first time. You will have the chance to renew your subscription for only 160 € per year (only 13,35 € per month)
Compatible with Touchclone and SKP-900.
The TDB007 Peugeot and Citroen Pin Code Wizard is a simple and easy device to extract the pin code from a range of vehicles. It can read the pin code from the ECU memory of all Engine Control Units, Sagem, Johnson Controls and Valeo BSI units.
The device has two modes of operation :
- Working Key Mode : The device can read the pin code from the vehicle immobiliser BSI memory when a working key is available, within 5 minutes.
- Lost Key Mode : The device can read the pin code from the vehicle immobiliser BSI memory when there are no working keys, the time taken depends on the vehicle type and system, but typically takes between 15 and 90 minutes.
The TDB007 has a small backlit LCD display, small keypad to navigate the menu, a rear magnet to aid testing and secure the device when working under the bonnet/hood, an OBD Connector and cable and an additional cable/connectors for working with vehicles that do not have CAN BUS located within the OBD Diagnostic connector.
- The device can work on all Peugeot and Citroen based models from 2001 to 2015 as listed in the applications guide on our web site. The applications are updated on a regular basis, so please always refer to the latest version to ensure you have the up to date information before you attempt to read the pin code.
- The device works on vehicles from 2005/2006 using the OBD port if CAN bus is available at the vehicle OBD connector, however for vehicles prior to this a direct connection can be made to the engine ECU connector CAN wires to enable communication with the BSI immobiliser ECU.
- The device will only work on Peugeot and Citroen derived models, and cannot read the pin code on Fiat or Toyota derived models such as the 107, C1 and Scudo as examples.
Handy Baby is the fastest and easy to use cloning device.
Handy Baby is able to copy all kind of transponders (4C/4D/46/48).
It can make copies of ID48 transponders of Honda, Fiat, VAG Group until 2005 and some Volvo models. It also copies all ID46, T5, 4D and 4C and new transponders ID67G for Toyota.
Its weight is very light, the battery is rechargeable and you can use with just one hand.
You can also read the frequency of the remote keys and it can also work as a coil detector.
Handy Baby recognizes teh following transponder chips: 13, 40/41/42/44/45, 4C/46/48, 4D61/62/63/67/68/68+/71.
This set includes Bluetooth battery with Bluetooth technology and software for precoding Fiat keys.
Keyline BLUETOOTH & POWER ADAPTOR is the next-generation rechargeable battery with Bluetooth technology to use 884 Decryptor Mini wirelessly. There are many advantages: perfect integration, no need for power cables and longer duration of use. Maximum flexibility.
With Bluetooth & Power Adaptor, 884 Decryptor Mini can be managed from any smartphone and tablet*, Android and iOS**, thus opening the door to cloning with Apple devices.
Its stable and long-term charge (up to 10 hours with continuous use) makes 884 Decryptor Mini even more flexible and able to meet the needs of all automotive specialists that want to offer a cloning service anywhere.
Use is immediate: enable the Bluetooth connection on your smartphone or tablet and access the Keyline Cloning Tool App; 884 Decryptor Mini and the battery will automatically be recognized by your device allowing you to immediately start cloning wirelessly. At the first power, please select the 884 Decryptor Mini with which you want to connect, in the menu "Cloning devices", then save the Bluetooth & Power Adaptor in the menu "My Products".
Bluetooth & Power Adaptor is easy and rechargeable via PC connection (Windows or Mac) or battery power. In addition, during charging, 884 Decryptor Mini can be used continuously.