Standalone key programming device that supports key addition (also in all keys lost situations) for the following models. The device does not delete previously programmed keys and the procedure takes around 4 hours.

– 2010-2016 Volvo S60 and S60 Cross Country

– 2006-2016 Volvo S80

– 2012-2016 Volvo V40 and V40 Cross Country

– 2011-2016 Volvo V60 and V60 Cross Country

– 2007-2016 Volvo V70

– 2008-2016 Volvo XC60

– 2007-2016 Volvo XC70

Supported keys are the keys made by Continental - part no. 5WK49264.

It includes the following software and accessories: AVDI Interface + PROTAG programmer + ABPROG programmer + ZN046 + J1850 adapter + ZN036 + ZN039-2 + ZN051 + ZN053 + ZN054 + ZN055 + Zn056 + Zn057 + ZN059 + ZN060 + Zn061 + Zn063

It includes the following software and accessories: AVDI Interface + PROTAG programmer + ABPROG programmer + J1850 adapter + ZN036 + ZN039-2 + ZN040 + ZN051 + ZN052 + ZN053 + ZN054 + ZN055 + Zn056 + Zn057 + ZN059 + ZN060 + Zn061 + Zn063 + ZN037 + ZN038 + Zn066

You NEED to have TN006 active in order to use the emulator. Emulator should ONLY be purchased as a REPLACEMENT.

It is also included as part of the TN006 special function.

New AVDI Interface or activate AMS is required to purchase this product.

The TA24 key is a key developed by Abrites in order to assist our customers when they need a non-proximity key for Chysler/ Dodge/ Jeep vehicles such as the Jeep Cherokee without a proximity key (The TA24 needs to be inserted into the Electronic Ignition Switch in order to start the vehicle).

This key will work with 2013+ EU (European Models) based- cars with Hitag AES.

TA19 is a electronic key head (Abrites Renault/Dacia keys). It is used to program keys using the Abrites diagnostics for Renault/ Dacia and the PROTAG programmer for the following models: Renault Symbol III 2012+; Renault Traffic III 2014+; Dacia Dokker 2012+; Dacia Lodgy 2012+; Dacia Sandero II 2012+; Dacia Logan II 2012+; Opel Vivaro B 2014+

It can be used with the mechanical metal blade from KeyLine Company. These keys features a remote control which can be programmed on vehicle.

TA19 is a electronic key head (Abrites Renault/Dacia keys). It is used to program keys using the Abrites diagnostics for Renault/ Dacia and the PROTAG programmer for the following models: Renault Symbol III 2012+; Renault Traffic III 2014+; Dacia Dokker 2012+; Dacia Lodgy 2012+; Dacia Sandero II 2012+; Dacia Logan II 2012+; Opel Vivaro B 2014+

It can be used with the mechanical metal blade from KeyLine Company. These keys can only be used to start the car as they do not have remote controls.

The TA30 is a transponder emulator designed to emulate ALL DST-AES transponders where Page 1 is 88, A8 and A9. This allows extended functionality and the ability to program transponders NOT ONLY found in various Toyota vehicles of the latest generation but ALL vehicle types using these transponders, giving the customer the ability to write and lock all pages of the EEPROM as well as write and lock ALL KEYS.

Using our software, the customer can also perform TIRIS AES verifying of a AES1 crypto key. The TA30 has been placed in our signature shell giving the product a sleek finish.

This reusable transponder (all previously locked pages can be unlocked) is designed to be programmed with the Abrites TagKeyTool and the PROTAG and will offer a stable working solution for all customers with problems in such vehicles.

TA17 is a Electronic key head intended for assembling on the metal key blades produced from KeyLine Company. The main functions are:

- Emulation of all DST+ transponders in 40 or 80 bits SK authentication mode. Useful for master smart key preparation by diagnostic with Abrites Diagnostics for Toyota/Lexus/Scion vehicles, cloning of Texas 4D keys, replacement of the keys for BMW bikes, programming on Ford vehicles.

- Emulation Toyota/Lexus/Scion g-transponder (type 98 smart key DST 80). Content of the transponder is fixed. Useful for master key programming by dump.

- Unlimited number of transponder programming attempts.

TA16 is a KEY-CARD for Renault vehicles. It is used for programming to Renault vehicles using the Abrites diagnostics for Renault/ Dacia software together with the PROTAG programmer for the following models: Renault Clio IV 2012+; Renault Captur 2013+; Renault Samsung QM3 2013+; Renault Lutecia 2012+.

These cards can only be used to start the car as they do not have remote controls.

TA14 is a KEY for all types Mercedes with IR. Frequency - 433 Mhz. It can be used with the Abrites PROTAG programmer only. These keys have the ability to both start the car and to function as remote controls.

The TA9 is a universal key that can be learned to any Audi A4 (2007+), A5 (2007+), Q5 (2007+), A6, A7, A8 vehicles produced after 2010 with ease. Frequency - 868 Mhz. We have developed the transponder in such a way that it can be easily used with AVDI.

Some of its main features include:

- TA9 - transponder

- They can be used for key programming together with a remote control function.

- Also these models store mileage in the key. When using the TA9 transponder this data can be modified.

The TA31 extractor by Abrites is the successor of the TA26 Abrites extractor, developed in order to assist with the extraction of PIN codes from Hyunday/Kia vehicles and the 7th Component Protection byte from VAG vehicles as well as with additional functionality such as cloning of HiTAG2 keys

You can use the TA31 to reduce the time to extract the 7th CP byte from various VAG vehicles such as the Passat B6/CC where the extraction time is reduced to about a minute in all keys lost situations (when you have the first 6 CP bytes from the ECU).

This adapter will also help with the password extraction for the PIN from working keys in Hyundai/ KIA vehicles. Please note that you will require the correspondent Abrites software as well as a PROTAG programmer in order to use the TA31 extractor. For more details - please check the user manuals.

It can also be used to clone Hitag II transponders to TA31 instead of using TPX3/4. This is done using Key Clone in the Tag Key Tool. Once the key is learned, a U-Shaped KeyLine blade for the TA31 head can be cut and used the start the car.