 0034910228127 | europe@key-code.com |
Our delivery process will follow the required steps to assure the health of our workers, couriers and customers - Hours: 9:00 - 18:00hrs |
Tango programmer is a new generation of transponder programmer which is developed to read, write and generate the latest transponders used in the latest vehicle immobilizer technologies.
After generating a new transponder with TANGO Programmer, you will not need any additional diagnostic equipment to program the generated transponder to the car! It will start the car directly.
Here is the new tuning tool hardware that is capable of communicating with a most OBDII compliant vehicle susing a standard J2534 interfacte. Combined with Tango is capable of reflashing a large number of newer Toyota, Subaru and Mitsbushi vehicles, and support for ther cars in progress.
BARRACUDA es un equipo complementario de Orange y TANGO desarrollado por SCORPIO.
The first branch of Barracuda programmer features which will be available at release and be included in base software is Reset/Renewal of used HITAG based vehicle keys. Every reset function released in Barracuda programmer is independently developed, tested and digitally signed by us. Classification During the process we have studied extensively hundreds of HITAG keys, both new and used, while we were developing the database for the reset functionality. One of the main conclusions which we drew was that key classification by part number is not entirely correct, can be misleading and will unnecessary bloat the software with menus, sub-menus, etc... Most keys from same brand can differentiate by more reliable secondary signs like, variations in outer shell, number of buttons, frequency, type of plate, type of used PCF, etc... In this regard in Barracuda keys will be classified by brand and version number, while the help files and additional text information available in software for each function will provide the secondary signs by which a user can decide which is the correct function to use for the key they want to reset. Such approach solves two problems, first it allows to correctly reset keys regardless of part number and avoid a problem when the part number of a key, a user wants to reset, is not listed. This would leave the user thinking it can't be reset, while more often than not that is not the case, as long as the secondary signs match. Second as mentioned above it will reduce software bloating significantly. We intend to add more keys in future updates and keeping bloating minimal from start will make navigation and general use of the software easier.
Tango programmer is a new generation of transponder programmer which is developed to read, write and generate the latest transponders used in the latest vehicle immobilizer technologies.
After generating a new transponder with TANGO Programmer, you will not need any additional diagnostic equipment to program the generated transponder to the car! It will start the car directly.
It includes the following software:
HITAG2
Opel key maker
Mercedes cars key maker
Mercedes trucks key maker
Toyota key maker
Honda motorcycles (HITAG2) key maker
Chrysler key maker
Renault cars key maker
Renault trucks key maker
Rover key maker
Iveco trucks key maker
Ford cars key maker
Chevrolet (GMC) key maker
Dacia key maker
Citroen key maker
Fiat key maker
Isuzu key maker
Peugeot key maker
Ducati key maker
Cadillac key maker
Gilera & Piaggio (ST10..MCU) key maker key maker
Alfa Romeo key maker
Lancia key maker
Dodge key maker
Daihatsu key maker
Suzuki key maker
Ferrari key maker
Jeep key maker
Nissan key maker
Volvo key maker
Component Security Viewer
Synchro maker Volvo
Dump editor BCM2
Reset of Toyota/Lexus/Subaru Smart Keys 40,80,128 bit
SLK-02 maker
SLK-03 maker
SLK-04 maker
SLK-05 maker
Toyota Image Generator G-KeysPage1 36,56,96,37,57
Toyota+: OBD Reset European cars based on G-immoboxes
Toyota Dump Editor – Synchro Engine ECU, Smartkey ECU, ID Code Box, Steering Lock ECU
Daihatsu Image Generator G-Keys
BMW motorcyles (DST80) key maker
Toyota Image Generator H-Keys: Page1 39, 59, 5A, 99
BCM2 key maker (Audi A4/A5/Q5)
This pack includes the following products:
- SLK01
- SLK02
- SLK03
- SLK04
- SLK05
- SLK06
SIEMENS (simcard)
MARELLI+MARELLI2 (activation/simcard)
BOSCH (simcard)
DENSO (simcard)
VAGDSG+EASYTRONIC (activation/simcard)
FIATBSI TOOL (simcard)
MOTORCYCLE ECU TOOL (simcard)
VOLVO TOOL (simcard)
MULTITOOL PSA BSI
MULTITOOL SMART SAM (activation/simcard)
MULTITOOL FIAT BSI2 (activation/simcard)
MULTITOOL OPELBCM (activation/simcard)
MULTITOOL OPEL/GMECU (activation/simcard)
MULTITOOL OPEL/GMTCM (activation/simcard
MULTITOOL OPEL/GMEPS (activation/simcard)
FIATBSI TOOL (simcard)
MULTITOOL PSA BSI
MULTITOOL SMART SAM (activation/simcard)
MULTITOOL FIAT BSI2 (activation/simcard)
MULTITOOL OPELBCM (activation/simcard)
The Panther SX is a high quality key machine able to cut lazer and dimple keys with precision and simplicity with the added benefit of carrier locks to aid control or certain applications. In addition the clamps on the SX version can be angle through 45 degrees to enable angled cuts to be performed.
The Panther range of key cutting machines offer a high quality and robust design offering excellent precision and long term performance in even the busiest key cutting centres. The ergonomic design and broad base gives the machine a stable operation and accurate. The most striking feature of this series of machines is the versatility and accuracy built into this machine that an only be matched by machines that a far more expensive.
The ball bearing chassis offers the highest accuracy, smooth operation and support whilst being total maintenance free. The rotary level enables the spring tension to adjusted to your preferred settings. The level control offers a smooth and precise feel that gives the operator confidence in the milling process.
Thanks to the electronic control supported adjustment system the calibration can be completed in a few steps and offer an accuracy of 0.01mm. The correct setting is detailed with a go/no go warning light calibration system that assists easy and rapid calibration. Both the X and Y axis can be locked in any position by simply tightening the control level.
An LED illumination strip built into the roof of the body and directed at the cutter / jaw area offers excellent visibility of the work in all ambient light conditions.
The tracer can be lowered to the work to enable the centre to be identified and the position of the tracer pre checked without the cutting mill touching the new key. Once confirmed can be locked back in the calibrated position. Once the cutter is lowered to the work the handle can be rotated and lock to the depth of the required milling, this enables the calibrated depth to be maintained.
The highly accurate clamping system has 3 different positions to offer the greatest flexibility of key clamping. The jaws included graded position and stop positioning. The quick clamps offer rapid and accurate clamping of the work.
The cutting tools are conveniently stored in the toolbox in the front of the machine.
The Panther is CE approved and equipped with a safety shield over the cutting blade which protects the operator and deflects displaced metal.
TECHNICAL SPECIFICATIONS:
Height: 34x30x42
Engine power:150W
Noise: 64dB.
Weight: 20 Kg.
RPM: 5800 r.pm. 150W
220V
SIEMENS (simcard)
MARELLI+MARELLI2 (activation/simcard)
BOSCH (simcard)
DENSO (simcard)
VAGDSG+EASYTRONIC (activation/simcard)
MULTITOOL OPEL/GMECU (activation/simcard)
MULTITOOL OPEL/GMTCM (activation/simcard
BCM (activation/simcard)
With MultGiga you will be able to connect, energize and communicate on bench with reading and programming modules of most of diagnostic devices and immobilizer readers. It also communicates with dashboards and ECU'S.
What is MultGiga?
- Communication interface by OBD
- It doesn't replace clipping or soldering procedures
- It doesn't replace the transponder module
- Supports several car makers.
It has an OBD plug, so it can be connected to a diagnostic equipment, allowing user to read passwords, unit adaptation, resets, generation of keys and others.
It is a very versatile device, because most of procedures can be done directly on bench, so the presence of the vehicles is not needeed. This will help you to expand your business because you will be able to work on vehicles from different cities.
Key Line
This set includes Bluetooth battery with Bluetooth technology and software for precoding Fiat keys.
Keyline BLUETOOTH & POWER ADAPTOR is the next-generation rechargeable battery with Bluetooth technology to use 884 Decryptor Mini wirelessly. There are many advantages: perfect integration, no need for power cables and longer duration of use. Maximum flexibility.
With Bluetooth & Power Adaptor, 884 Decryptor Mini can be managed from any smartphone and tablet*, Android and iOS**, thus opening the door to cloning with Apple devices.
Its stable and long-term charge (up to 10 hours with continuous use) makes 884 Decryptor Mini even more flexible and able to meet the needs of all automotive specialists that want to offer a cloning service anywhere.
Use is immediate: enable the Bluetooth connection on your smartphone or tablet and access the Keyline Cloning Tool App; 884 Decryptor Mini and the battery will automatically be recognized by your device allowing you to immediately start cloning wirelessly. At the first power, please select the 884 Decryptor Mini with which you want to connect, in the menu "Cloning devices", then save the Bluetooth & Power Adaptor in the menu "My Products".
Bluetooth & Power Adaptor is easy and rechargeable via PC connection (Windows or Mac) or battery power. In addition, during charging, 884 Decryptor Mini can be used continuously.
