-
0034910228127 | europe@key-code.comDear customers we are experiencing shipping delays due to Black Friday and Christmas holidays. Thank you for your understanding.
Hardware Autel
18 Products
Sort by:
AUTEL IM508 LOCKSMITH SET PROGRAMMING AND DIAGNOSTICS DEVICE (IM508 + XP400)
This professional set includes all automotive locksmith needs.
It includes the following items:
- Autel IM508
- Autel XP400
Ref: AUTEL-IM508-LOCKSMITH
AUTEL IM508 PRO PROGRAMMING AND DIAGNOSTICS DEVICE (IM508 + XP400 PRO + KPA ADAPTERS SET)
This professional set includes all you need to perfomr diagnostics, key programming and reading.
It includes the following items:
- Autel IM508
- Autel XP400 Pro
- KPA adapters set
Ref: AUTEL-IM508-PACK-PRO
Mercedes Benz EZS EIS ELV ESL Dash Gateway Full Test Cables with OBD compatible with Autel MaxIm (G-BOX2 embedded)
New device designed for on-bench testing of EZS (EIS), ESL (ELV).
G-BOX2 adapter embedded.
Compatible with the following Autel devices: Autel MaxilM, XP400 PRO, MaxiIM IM608, MaxiIM IM508, MaxiIM IM608PROKPA.
Comes with ESL Emulator inside, has automatically mode switching - read ESL using and Emulation mode. You can test both old (Motorola based EZS) and new (NEC based) units without the car - just connect them with special set of cables.
Could be purchased in place of old devices: EIS cables set, ESL emulator, W164/166/203/204/207/210/211/212/220/221/639/906 testing cables.
Ref: AUTEL-ESL-TEST
BATTERY AND ELECTRICAL SYSTEM ANALYSIS TOOL AUTEL BT506
THE BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a battery’s true health.
The BT506 enables technicians to view the health status of vehicle's battery and electrical system. Download the free and easy-to-use mobile app, available for iOS and Android devices, to use with the BT506 to perform testing and display test results.
Support in-vehicle and out-of-vehicle testing of passenger vehicle batteries
Test 6- and 12-volt batteries: 100 - 2000 CCA
Test 12- and 24- cranking/charging systems
Test Flooded, AGM, AGM Spiral, EFB and GEL batteries
Compatible with CCA, CA, SAE, EN, IEC, DIN, JIS and MCA
Ref: AUTEL-BT506
AUTEL G-BOX2 8A CABLE FOR TOYOTA ALL-KEY-LOST SITUATIONS
Used for programming of Toyota / Lexus / Scion 8A bladed keys
No need to disassemble or replace immobilizer in All Keys Lost situation
Supports Toyota Camry, RAV4, Prius, Highlander, Tacoma, Sienna, Levinn 8A mechanical key (non-smart key) all keys lost programming
Ref: AUTEL-8A
ADAPTER SET FOR AUTEL XP400 PRO
Includes 12 adapters for the XP401Pro that enables Read/ Write/ Erase for Mercedes Benz ESL_W209/ W906 Data, Mercedes Benz NEC Key Learning, BMW EWS3 Key Learning and Volkswagen/ AUDI/ BMW/ Benz Key Unlock.
Package List:
1pc x APB113 PCF79XXadaptor
1pc x APB114 EWS3 adaptor
1pc x APB115 NEC Adapter
1pc x APB118 NEC ELV adaptor
1pc x APB119 TB28FXXXadaptor
1pc x APB120 TMS370adaptor
1pc x APB121 AM29FXXX Adaptor
1pc x APB122 AM29FXXX adaptor
1pc x APB123 AM29FXXX adaptor
1pc x APB126 M35080/D80 adaptor board
1pc x APB127 MC68HC0(7)05BXX adaptor
1pc x APB128 MC68HC05X32 adaptor
1pc x Storage Case
Ref: AUTEL-KPA-ADAPTER
Ref: AUTEL-IM608-PRO-PLUS
AUTEL APB112 SMART KEY SIMULATOR
The APB112 smart key simulator is used to collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip. It can also simulate the vehicle key chip. Currently, it supports to simulate the 4D type chip. More key chip types will be supported with future upgrades.
Key Features:
- Smart key simulator
- Compatible with IM608, IM508, and MX808IM
- Compact but would need to be used with the XP400
- Cannot be used with the XP200
- 46, 4D data collection
- 46 smart key password calculation
- 46 chip simulation
- Toyota 4D (94/D4, 98) smart key simulation
- Toyota H (88/A8, A9, 39) smart key simulation
- Collects data from the ignition coil
- Identify ignition coil troubles
- Decode vehicle key chip data
- Simulate vehicle key chip (ex - 4D chip)
- Must be used with an Autel diagnostic tool
- Toyota/Lexus smart key all key lost
- Chip decoding (Hyundai 46)
- Includes: APB112 Smart Key Simulator, USB Cable, Quick Reference Guide
Ref: AUTEL-APB112
AUTEL G-BOX2 TOOL FOR MERCEDES ALL-KEY-LOST
AUTEL G-BOX tool For Mercedes All-Key-Lost
To use with both the Autel MaxiIM IM608 and Auro IM600.
The Autel G-Box is designed to be used on Mercedez-Benz vehicles with DAS3 CAN EIS/EZS in AKL. It helps to reduce the time for reading the ECU data from W204 and W207 EISs by over 85%.
Key Features:
- Mercedes Benz All Keys Lost, Faster Password Calculation
- Used with IM608 or IM508 with XP400
- Used for Faster Mercedes ECU data and EIS password calculation
- Mercedes DAS3 can EIS/EZS all keys lost
- Reduce time reading W204 ECU data & W207 EIS by over 85%
- No need to remove and reinsert the key for W221 & W164 after 2009 models
- BMW DME/DDE ISN reading and writing in boot mode
- Also compatible with Auro IM600 and Auro IM100 with XP400
Ref: AUTEL-GBOX2
KEY AND CHIPS PROGRAMMER AUTEL XP-400 PRO
COMPLETE SET FOR MERCEDES, BMW KEY PROGRAMMING AND EEPROM READING
Ref: AUTEL-XP400-PRO
Filter By
En oferta
IO TERMINAL FULL VERSION SOFTWARE (SIEMENS, MARELLI, BOSCH, DENSO, FIAT BSI, OPEL, VOLVO, PSA, MOTO, SMART SAM)
SIEMENS (simcard)
MARELLI+MARELLI2 (activation/simcard)
BOSCH (simcard)
DENSO (simcard)
VAGDSG+EASYTRONIC (activation/simcard)
FIATBSI TOOL (simcard)
MOTORCYCLE ECU TOOL (simcard)
VOLVO TOOL (simcard)
MULTITOOL PSA BSI
MULTITOOL SMART SAM (activation/simcard)
MULTITOOL FIAT BSI2 (activation/simcard)
MULTITOOL OPELBCM (activation/simcard)
MULTITOOL OPEL/GMECU (activation/simcard)
MULTITOOL OPEL/GMTCM (activation/simcard
MULTITOOL OPEL/GMEPS (activation/simcard)
MULTITOOL FORD/BCM (activation/simcard)
VOLVO_CEM_P3 (activation/simcard)
VOLVO_CEM_P2 (activation/simcard)
WEBASTOLIC000001 (activation/simcard)
FOMOCOKVMLIC000001 (activation/simcard)
Ref: IO-TERMINAL-FULL-SW
IO TERMINAL PACK BSI-BCM (HARDWARE + FIAT, SMART, PSA, OPEL BCM)
FIATBSI TOOL (simcard)
MULTITOOL PSA BSI
MULTITOOL SMART SAM (activation/simcard)
MULTITOOL FIAT BSI2 (activation/simcard)
MULTITOOL OPELBCM (activation/simcard)
Ref: IO-TERMINAL-BSI-BCM
IO TERMINAL PACK ECU GEARBOX (HARDWARE + SIEMENS, MARELLI, BOSCH, DENSO, OPEL GMECU, OPEL GMTCM, VAG DSG)
SIEMENS (simcard)
MARELLI+MARELLI2 (activation/simcard)
BOSCH (simcard)
DENSO (simcard)
VAGDSG+EASYTRONIC (activation/simcard)
MULTITOOL OPEL/GMECU (activation/simcard)
MULTITOOL OPEL/GMTCM (activation/simcard
BCM (activation/simcard)
Ref: IO-TERMINAL-ECU
- Novedad
STABILIZER AND REGULATOR OF 220V-100 A CAR BATTERY
The GYSFLASH 101.12 CNT is a CONNECTED high-power 100 A charger with inverter technology. It will maintain a 12 V lead or lithium battery at a perfectly stabilized voltage during the diagnostic process.
It will deliver the best charging cycle recommended for the maintenance of the most advanced vehicles on the market. Its USB connectivity makes it 100% customisable.
Ref: GYS-PACK
DIAGNOSTICS CHART + 220 V BATTERY STABILIZER
JR-DIAG diagnosis trolley, easy handling and great stability thanks to its platform and its independent and brake wheels, its own design and customizable with various brands, it has a drawer in the upper part, anchors for computers and mouse base, quick access sockets for clamps and base for complementary battery, ideal for stabilizers, programming, etc.
It can be used as a mobile workstation for diagnostic machines, laptops, testers and battery chargers, it comes with a hole designed for an auxiliary battery, quick connections for the cables, a top box with a laptop holder and the possibility of customize to suit the client with several pre-established plates or a blank for its manufacture by the user.
Includes a 220 V battery stabilizer. Essential for programming vehicles with maximum security.
Ref: HE-CART-EST
Key Line
BLUETOOTH KIT FOR KEYLINE 884 DECRYPTOR MINI + FIAT PRECODING SOFTWARE
This set includes Bluetooth battery with Bluetooth technology and software for precoding Fiat keys.
Keyline BLUETOOTH & POWER ADAPTOR is the next-generation rechargeable battery with Bluetooth technology to use 884 Decryptor Mini wirelessly. There are many advantages: perfect integration, no need for power cables and longer duration of use. Maximum flexibility.
With Bluetooth & Power Adaptor, 884 Decryptor Mini can be managed from any smartphone and tablet*, Android and iOS**, thus opening the door to cloning with Apple devices.
Its stable and long-term charge (up to 10 hours with continuous use) makes 884 Decryptor Mini even more flexible and able to meet the needs of all automotive specialists that want to offer a cloning service anywhere.
Use is immediate: enable the Bluetooth connection on your smartphone or tablet and access the Keyline Cloning Tool App; 884 Decryptor Mini and the battery will automatically be recognized by your device allowing you to immediately start cloning wirelessly. At the first power, please select the 884 Decryptor Mini with which you want to connect, in the menu "Cloning devices", then save the Bluetooth & Power Adaptor in the menu "My Products".
Bluetooth & Power Adaptor is easy and rechargeable via PC connection (Windows or Mac) or battery power. In addition, during charging, 884 Decryptor Mini can be used continuously.
Ref: BTP-884-PACK
TOYOTA LAND CRUISER PRADO (+2009) 3 BUTTON PROXIMITY REMOTE KEY ID6B (8990460540, 8990460542)
Proximity remote key with 3 buttons used in Toyota Land Cruiser Prado manufactured after 2009.
VIN number is required for ordering this product.
Toyota part number: 8990460540, 8990460542
Transponder: ID6B 6F
Emergency blade not included
433 mhz
Ref: TO900TE13-OEM
