Escríbenos en WhatsApp

Key Cutting Machines

65 Products
Key Cutting Machines

CLAMPS FOR CONDOR X3

Clamps for Condor X3 keys cutting machine

This clamp is used to fix the key on the Condor machine for a safety and quality cut

Ref: MORD-CONDX3

CLAMP M3 FOR MINI-CONDOR KEY CUTTING MACHINE (FO21 AND SX9 KEYS)

Clamps for Mini Condor keys cutting machine

This clamp is used to fix the key on the Mini Condor machine for a safety and quality cut

Compatible with Citroën and Peugeot keys SX9 profil and for Ford Tibbe (FO21)

Ref: MORD-MCONDM3

MANUAL KEY CUTTING MACHINE PANTHER SX

The Panther SX is a high quality key machine able to cut lazer and dimple keys with precision and simplicity with the added benefit of carrier locks to aid control or certain applications. In addition the clamps on the SX version can be angle through 45 degrees to enable angled cuts to be performed.


The Panther range of key cutting machines offer a high quality and robust design offering excellent precision and long term performance in even the busiest key cutting centres. The ergonomic design and broad base gives the machine a stable operation and accurate. The most striking feature of this series of machines is the versatility and accuracy built into this machine that an only be matched by machines that a far more expensive.


The ball bearing chassis offers the highest accuracy, smooth operation and support whilst being total maintenance free. The rotary level enables the spring tension to adjusted to your preferred settings. The level control offers a smooth and precise feel that gives the operator confidence in the milling process.


Thanks to the electronic control supported adjustment system the calibration can be completed in a few steps and offer an accuracy of 0.01mm. The correct setting is detailed with a go/no go warning light calibration system that assists easy and rapid calibration. Both the X and Y axis can be locked in any position by simply tightening the control level.


An LED illumination strip built into the roof of the body and directed at the cutter / jaw area offers excellent visibility of the work in all ambient light conditions.


The tracer can be lowered to the work to enable the centre to be identified and the position of the tracer pre checked without the cutting mill touching the new key. Once confirmed can be locked back in the calibrated position. Once the cutter is lowered to the work the handle can be rotated and lock to the depth of the required milling, this enables the calibrated depth to be maintained.


The highly accurate clamping system has 3 different positions to offer the greatest flexibility of key clamping. The jaws included graded position and stop positioning. The quick clamps offer rapid and accurate clamping of the work.


The cutting tools are conveniently stored in the toolbox in the front of the machine.


The Panther is CE approved and equipped with a safety shield over the cutting blade which protects the operator and deflects displaced metal.

TECHNICAL SPECIFICATIONS:


Height: 34x30x42

Engine power:150W

Noise: 64dB.

Weight: 20 Kg.

RPM: 5800 r.pm. 150W

220V

Ref: PANTHER-SX

IMAGE MORTICE KEY CUTTING MACHINE

The Image key cutting machine is designed for high volume professional users and offers Bit & Double Bit, Pump keys, Flat keys & square keys. It boasts a high quality and robust design offering excellent accuracy and long term performance.


The ergonomic design and broad base gives the machine a stable operation and accurate results.The most striking feature of the Image is how it is inclined towards the operator to offer greatest comfort and control.


The control button are built into the top of the body and operate with quality switches that are protected from contamination. The key clamping can adjust to any size of key with a quick release lever and the follower is conveniently located to make the copying as easy as possible. The calibration check is easy to perform and quickly adjustable.


The design of the control handles makes the cutting of new keys simple and accurate. A grip handle allows control of the depth of cut whilst the long control lever enables fine control of the width of cut. The bed uses maintenance free linear ball bearings which gives a fantastically smooth operation and amazing control.


The lower RPM and quality designed motor makes the Image a very quiet machine, this is important where consistent use and high volumes are involved. To the side a polishing brush enables rough edges and burrs to be polished and assists with stopping the machine.

Ref: IMAGE

MANUAL KEY CUTTING MACHINE CONDOR XC-002

Manual key cutting machine Condor XC-002.


It has an ergonomic design and it s built in aluminium.

It supports all kind of keys (laser, tibbe, etc) thanks to its replaceable clamps.

Semi-automatic calibration

2 year warranty

If you have a Mercedes programming device VVDI-BENZ, you can associate your Condor XC-002 to your programmer and get a free daily token.

Ref: CONDOR-XC002

MANUAL KEY CUTTING CONDOR XC-009

Manual key cutting machine Condor XC-009.


It has an ergonomic design and it s built in high quality materials

Excellent device for VAN or workshop, can cut up to 100 keys with 1 battery power charging.

2 years warranty included.

Ref: CONDOR-XC009

CLAMP M4 FOR CUTTING HOUSE KEYS WITH MINI-CONDOR

Clamp M4 for Mini Condor key cutting machine


This clamp is used to fix the key on the Mini Condor machine for a safety and quality cut


Ref: MORD-MCONDM4