Lancia key maker software, used with Tango machine, for transponders production

Can read and write BMW FEM-BDC IMMO & Dash data, and it is safe and stable without losing data. Read and Write Immo 95128/95256 & dash 35080/35160 without soldering

Can read and write BMW FEM-BDC IMMO & Dash data, and it is safe and stable without losing data. Read and Write Immo 95128/95256 & dash 35080/35160 without soldering

The Land River and Jaguar KVM MC after 2018 is OTP type (One Time Programming). If you need to program new keys, you must replace the MCU. To change the KVM to virgin mode without replacing the KVM unit, you must use this clip and VVDI Prog. Data will be written withou soldering.

With this adapter you will be able to read the following memories using your VVDI-PROG:

- M35080

- M350803

- M350806

- M35080V6

- M35080VP

- 080D0WQ

- 160D0WQ

Supports PCF7922, PCF7941, PCF7945, PCF7952, PCF7953 and PCF7961 chips

Xhorse adapters set for MINI PROG and KEY TOOL PLUS for programming without soldering.

These are optional add-on adapters for the Mini Prog and Key Tool Plus programming devices.

The set includes:

- BMW CAS3/CAS3+ adapter (XDNP11)

- BMW CAS4/CAS4+ adapter (XDNP12)

- BMW FRM EWS4 (XDNP18)

- BMW DB15-DB25 adapter (for EWS4 adapter only) (XDNP14

- BMW D80/35080 (XDNP24)

- Honda Fit-L Dashboard adapter (XDNP20)

- PORSCHE BCM IMMO Adapter (XDNP17)

- LANDROVER KVM IMMO Adapter (XDNP16)

- VOLVO KVM IMMO Adapter (XDNP27)

- VOLVO CEM-2 IMMO Adapter (XDNP29)

- VOLVO CEM-1 IMMO Adapter (XDNP28)

- Instrument Cluster Adapters (Honda Fit-H, Honda Fit-L, Kia K3, Kia K5, Hyundai Sonata) (XDNP19)

- Hyundai Sonata dashboard (XDNP21)

- Kia K3 Dashboard (XDNP25)

- Kia K5 Dashboard (XDNP26)

This adapter is used to read Audi's encrypted BCM computer data. There is no need to solder anymore while reading AUDI BCM2 module, therefore, it is friendly to the people without soldering techniques. Being solder-free it creates a safer environment and also protect users’ money by avoid damaging AUDI BCM2 modules.

BARRACUDA es un equipo complementario de Orange y TANGO desarrollado por SCORPIO.

The first branch of Barracuda programmer features which will be available at release and be included in base software is Reset/Renewal of used HITAG based vehicle keys. Every reset function released in Barracuda programmer is independently developed, tested and digitally signed by us. Classification During the process we have studied extensively hundreds of HITAG keys, both new and used, while we were developing the database for the reset functionality. One of the main conclusions which we drew was that key classification by part number is not entirely correct, can be misleading and will unnecessary bloat the software with menus, sub-menus, etc... Most keys from same brand can differentiate by more reliable secondary signs like, variations in outer shell, number of buttons, frequency, type of plate, type of used PCF, etc... In this regard in Barracuda keys will be classified by brand and version number, while the help files and additional text information available in software for each function will provide the secondary signs by which a user can decide which is the correct function to use for the key they want to reset. Such approach solves two problems, first it allows to correctly reset keys regardless of part number and avoid a problem when the part number of a key, a user wants to reset, is not listed. This would leave the user thinking it can't be reset, while more often than not that is not the case, as long as the secondary signs match. Second as mentioned above it will reduce software bloating significantly. We intend to add more keys in future updates and keeping bloating minimal from start will make navigation and general use of the software easier.