Escríbenos en WhatsApp

Programming devices

443 Products
Key programming profesional equipment.

Mercedes Benz EZS EIS ELV ESL Dash Gateway Full Test Cables with OBD W210 W211 W212 W220 W221 W164 W166 W203 W204 W207 W906 W639

New device designed for on-bench testing of EZS (EIS), ESL (ELV).

Comes with ESL Emulator inside, has automatically mode switching - read ESL using and Emulation mode. You can test both old (Motorola based EZS) and new (NEC based) units without the car - just connect them with special set of cables.

Could be purchased in place of old devices: EIS cables set, ESL emulator, W164/166/203/204/207/210/211/212/220/221/639/906 testing cables.

Ref: MR_ESL_EIS_TEST

PEUGEOT AND CITROEN PIN CODE WIZARD TDB007

The TDB007 Peugeot and Citroen Pin Code Wizard is a simple and easy device to extract the pin code from a range of vehicles. It can read the pin code from the ECU memory of all Engine Control Units, Sagem, Johnson Controls and Valeo BSI units.

The device has two modes of operation :

- Working Key Mode : The device can read the pin code from the vehicle immobiliser BSI memory when a working key is available, within 5 minutes.

- Lost Key Mode : The device can read the pin code from the vehicle immobiliser BSI memory when there are no working keys, the time taken depends on the vehicle type and system, but typically takes between 15 and 90 minutes.

The TDB007 has a small backlit LCD display, small keypad to navigate the menu, a rear magnet to aid testing and secure the device when working under the bonnet/hood, an OBD Connector and cable and an additional cable/connectors for working with vehicles that do not have CAN BUS located within the OBD Diagnostic connector.

APPLICATIONS:

- The device can work on all Peugeot and Citroen based models from 2001 to 2015 as listed in the applications guide on our web site. The applications are updated on a regular basis, so please always refer to the latest version to ensure you have the up to date information before you attempt to read the pin code.

- The device works on vehicles from 2005/2006 using the OBD port if CAN bus is available at the vehicle OBD connector, however for vehicles prior to this a direct connection can be made to the engine ECU connector CAN wires to enable communication with the BSI immobiliser ECU.

- The device will only work on Peugeot and Citroen derived models, and cannot read the pin code on Fiat or Toyota derived models such as the 107, C1 and Scudo as examples.

Ref: PSA-PINOBD

VVDI2 CABLE EIS-ESL TEST FOR MERCEDES (W164, W166, W246, W204, W207, W212, W216, W221)

This cable allos to test EIS and ELV without having the car in the following vehicles:


W164, W166, W246, W204, W207, W212, W216, W221

Ref: VVDI-EIS

LIFS VAG 6 MONTH SUBSCRIPTION

LIFS subscriptions will be activated only in devices supplied by Key-Code


During LIFS term, to get credits you should click on “Syncronisation” button on PC Software.


During LIFS term, each time you syncronise your Zed-FULL from PC Software, credits will be fixed to 1000


During LIFS term, Zed-FULL will operate like it is in Credit based System, but in LIFS term all credits will be free for your usage.


During LIFS Term, all new software updates will be free for your Zed-FULL.


All new hardware requirements should be purchased.


At the end of the LIFS term, once you connect the Zed-FULL to PC software, all credits loaded to the device because of LIFS will be erased from the device. You will need to load credits to Zed-FULL from your credit bank.

Ref: LIFS-VAG-6

LIFS FORD 6 MONTH SUBSCRIPTION

LIFS subscriptions will be activated only in devices supplied by Key-Code


During LIFS term, to get credits you should click on “Syncronisation” button on PC Software.


During LIFS term, each time you syncronise your Zed-FULL from PC Software, credits will be fixed to 1000


During LIFS term, Zed-FULL will operate like it is in Credit based System, but in LIFS term all credits will be free for your usage.


During LIFS Term, all new software updates will be free for your Zed-FULL.


All new hardware requirements should be purchased.


At the end of the LIFS term, once you connect the Zed-FULL to PC software, all credits loaded to the device because of LIFS will be erased from the device. You will need to load credits to Zed-FULL from your credit bank.

Ref: LIFS-FORD-6

BMW EWS2, EWS3, EWS4 KEY PROGRAMMER AK90+

BMW AK90 Key Programmer for BMW EWS. THE ONLY ONE CAPABLE OF PROGRAMMING EWS2.


Description:


It can be used in models between 1995 and 2009 which use EWS system. Improved some of the EWS to read and write speed. This product is safe and effective. Is the key to match the best tool for BMW.


Functions:


1. Directly reading data dumps from MCU which marked 1D47J , 2D47J , 0D46J ,2L86D without removing MCU from circuit board , easy to do yourself.

2. With the help of software you can renew , lock or unlock keys as well.

3. Programming original chips "EML 10030A" for making keys .

4. Identifying keys for all EWS and CAS , showing VIN , key No. It can change VIN, can change mileage in ews.


The lastest update software version is V3.16 for EWS4.4. Includes EWS2.1/EWS2.2/EWS3/EWS3.3/EWS4/EWS4.4


Package list:


- 1pc x AK90 Host

- 1pc x AK90 10 Pin Cable

- 1pc x AK90-Chip data to read specific seat

- 1pc x AK90 USB communication cable

Ref: AK90
  • New

Mercedes Benz EZS EIS ELV ESL Dash Gateway Full Test Cables with OBD W210 W211 W212 W220 W221 W164 W166 W203 W204 W207 W906 W639

New device designed for on-bench testing of EZS (EIS), ESL (ELV).

Comes with ESL Emulator inside, has automatically mode switching - read ESL using and Emulation mode. You can test both old (Motorola based EZS) and new (NEC based) units without the car - just connect them with special set of cables.

Could be purchased in place of old devices: EIS cables set, ESL emulator, W164/166/203/204/207/210/211/212/220/221/639/906 testing cables.

Ref: MR_ESL_EIS_TEST02

SCOOTER IMMOBILISER READER

SUPPORTED IGNITION (CDI) / INJECTION CONTROLLERS

PHILIPS TSDI / DiTECH / PUREJET with TQFP-64 MC68HC908AZ60A (3K85K) MCU

READ/WRITE MC68HC908AZ60A internal EEPROM by K-Line

READ/WRITE external SPI EEPROM 25C160 by K-Line

READ MC68HC908AZ60A full 64K memory area

CLEAR FAULT MEMORY (NEW!)

RESET TO NEW / IMMO-OFF (NEW!)

MAGNETI MARELLI IAW 5AM HW103 / HW610 injection control module (HYBRID) with EEPROM 95160

READ / WRITE of external EEPROM 95160 by K-Line

RESET TO NEW (NEW!)

MAGNETI MARELLI with TQFP-64 MC68HC05Bxx (0D54J, 0D60J) MCU (system type ACI100, ACI50X, ACI60X)

READ / WRITE of MC68HC05B8/B16 internal EEPROM by K-Line

CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder

CALCULATE CRC of key data blocks

EFI TECHNOLOGY with ST72C334 / ST72F521 MCU and 95040 / 95080 EEPROM (system type ACII, AC2I, AC5I, AC8I, AC19I, AC20I, AC21I, AC23I, AC25I AC32I etc.)

READ / WRITE of ST72C334 internal EEPROM by K-Line

READ / WRITE of external 95040 or 95080 SPI EEPROM by K-Line

READ data of TRANSPONDER KEY in the ignition lock by K-Line. Any of EFI TEECHNOLOGY CDI now can be used as a simple transponder reader for scooter keys

RESET of previously used CDI controller to the FACTORY state

CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder

CALCULATE CRC of key data block

MAGNETI MARELLI IMM003/IMM006 immobilizer module with 28 pin MC68HC05E6 (0F82B, 0G72G, 2F75B) MCU

READ / WRITE of MC68HC05E6 (0F82B / 0G72G) internal EEPROM by K-Line

CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder

RESET of previously used Immobilizer Control Unit to the FACTORY state

MAGNETI MARELLI MIU1 (32MIU1) injection control module / throttle body with ST10F269-T3 MCU

READ KeyData memory block from FLASH of ST10F269-T3 by K-Line

CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder

MAGNETI MARELLI MIU2 (32MIU2) injection control module / throttle body with ST10F269-T3 MCU and EEPROM 95160

READ KeyData memory block from FLASH of ST10F269-T3 by K-Line

CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder

MAGNETI MARELLI MIU4 (32MIU4) injection control module / throttle body with ST10F269-T3 MCU and EEPROM 95160

READ KeyData memory block from FLASH of ST10F269-T3 by K-Line

CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder

MAGNETI MARELLI MIU G3 (32M3G1 / 38M3G1) injection control module / throttle body with Infineon SAK-XC2060 and EEPROM 95320

READ / WRITE of external EEPROM 95320 by K-Line

CALCULATE both MASTER and SERVICE key data for programming into the T5-TYPE11 transponder

RESET of previously used Injection Control Unit to the FACTORY state

CALCULATE CRC

MAGNETI MARELLI IAW15 injection control module with MOTOROLA MC68HC11F1 (2E87J) MCU

READ / WRITE of internal MC68HC11F1 EEPROM by K-Line

CALCULATE MASTER key data for programming into the T5-TYPE11 transponder

RESET of previously used Injection Control Unit to the FACTORY state

CALCULATE CRC

Ref: ASW