PSA BSI, Instrument Cluster Data Manager

Requirements AMS I18

PN017 is a function dedicated to the Instrument cluster and BSI odometer data calibration in PSA. With this special function you can read and calibrate the mileage stored in the BSI module and remove the synchronization with the instrument cluster (i.e. The modification is performed in the BSI exclusively and after a complete ignition cycle the mileage is not restored to the original value). In the cases where the sync removal does not apply it can calibrate the mileage in the cluster exclusively. Supported models are all CAN and UDS protocol models which includes almost all models produced after 2004.Support for Delphi UDS BSI 2016+ included.

BSI Exchange - allows you to read the whole content of the one BSI (JCI or Valeo CAN) and transfer it to another one. It is very important to use the same hardware type for the replacement BSI. The Valeo BSIs are two types – the old one is thick, while the new one is thin, so they can’t be mistaken. To use this special function you need to have PN017 + PN018 special functions. The UDS BSI modules are supported via read/write EEPROM and flash.

N.B. Please note that you will require an AVDI interface with an active AMS in order to use this special function. Absolutely no tokens required.

Supported Vehicles: PSA, 1007, 207, 307 2005+, 208 2012+, 208 II, 2008 2013+ 301 2012+, Citroën Berlingo 2008+, 308, 3008, 3008 II ,508, 5008, 407, 607 2006+, 807 2006+, Expert II, Partner 2008+, PSA C3 2013, PSA Jumpy 2016+, Toyota ProAce 2016+, PSA 3008 II, PSA 308 II 2016+, PSA Expert2017+, PSA 5008 II, Citroën, C-Elysee 2012+, C2, C3 2006+, C3 II, C3 III, DS3, C4, C4 Picasso, C4 II, DS4, C5 2004+, C5 II 2007+, DS5, C6, C8 2007+, Jumpy II, Jumpy Electric, Lancia Phedra 2008+, PSA Expert 2016, PSA C3 Picasso 2013, PSA C3 Aircross 2013+, PSA C32016+, PSA C4Picasso II2016+, PSA Jumpy2017+, Toyota ProAce 2017+, PSA C3 2013, PSA Jumpy 2016+, Toyota ProAce 2016+, C3 III, C4 II Picasso 2016+, DS7